Editing Timer Programming Feature; Editing The Settings For A Timer Recording; Editing Timer Programme Feature - Samsung DVD-VR300E Instruction Manual

DVD
AUTO : Select when you want to set video quality auto-
matically. It depends on the remaining time on
the DVD.
XP (high quality) : Select when video quality is are impor-
tant. (Approx. 1 hour)
SP (standard quality) : Select to record in standard quali-
LP (low quality) : Select when a long recording time is
required.(Approx. 4 hours)
EP (extended mode) : Select when a longer recording
VCR
AUTO : Select when you want to set video quality auto-
matically. It depends on remaining time of VCR
tape.
SP : Standard Play, for best picture quality.
LP : Long Play, for maximum recording time (3 times
SP).
Press the OK button.
5
If you make a mistake
Press the
want to change.
If the timer settings overlap
The programs are recorded in order of priority. If
timer recording is set for the first program and
then again for the second program and both pro-
grams overlap, the first program has priority. After
recording of the first program is complete, the
second
program starts being recorded.
To exit without saving the current setting
Press the MENU button.
To return to the previous menu
Press the RETURN button if you don't want to
set a timer recording.
Turn the power off to finish the timer recording.
6
• will appear on the front panel. It means that
a timer recording is registered.
• will blink if disc or tape is not inserted.
72 - English
Downloaded From Disc-Player.com Samsung Manuals
ty. (Approx. 2 hours)
time is required. (Approx.6 hours
about 1.2 Mbps)
➛❿
buttons to select the item you
The Timer Programming time may differ from
the set time depending on disc status and
Note
overall timer recording status (for example,
recording times overlapping, or when the pre-
vious recording ends within 2 minutes before
the start time of the next recording.)
Editing Timer
Programming Feature
Follow these directions to edit the timer record list.
Editing the settings for a timer
recording
Press the MENU button.
1
2
❷
Press the buttons to select "Programme"
❿
and then press the
DVD-RAM(VR)
VIdeoPlus+
Standard Timer
Playlist
VIdeoPlus+ Extended
Disc Manager
Programme
DVD-RAM DVD-RW DVD-R
or OK button.
Programme
:Off