Advertisement
Antenna + VCR/satellite receiver/cable box + DVD Recorder + TV
external device
(VCR/satellite receiver/cable box)
Antenna + DVD Recorder + external decoder box + TV
Before making or changing any rear panel connections, make sure
that all components are switched off and unplugged from the wall
outlet.
Connect the cable from the antenna/cable TV outlet to the antenna
input on your VCR/satellite receiver/cable box.
Connect the antenna output of your VCR/satellite receiver/cable box
to the ANTENNA IN of DVD Recorder using antenna cable.
Use another RF antenna cable to connect the ANTENNA OUT of
DVD Recorder to the antenna input on your TV.
Connect the AV1 connector on DVD Recorder to the SCART AV
connector on TV using a SCART cable.
Connect the AV2 connector to a SCART AV connector on
VCR/satellite receiver/cable box.
Setup "AV1 Output" using on-screen menu.
Refer to page 29 of the Instruction Manual for more information.
If you connect external decoder box to DVD recorder, you can
record scrambled channels received through the built-in TV tuner in
DVD Recorder.
Connect RF antenna cables as shown.
Connect the AV1 connector on this recorder to the SCART AV
connector on TV using a SCART cable.
Connect the AV2 connector to a SCART AV connector on decoder
box.
Set channel decoding function on using on-screen menu.
Refer to page 27 of the Instruction Manual for more information.
We recommend using one of the discs in the table as they have
been confirmed to be compatible with this unit.
Other discs may not perform correctly.
Media
Brand
TDK
That's
DVD-R
Maxell
Panasonic
Ritek
Verbatim
JVC
DVD-RW
Radius
TDK
MCC
MEI
DVD-RAM
Fuji
Maxell
TDK
English-2
Speed
4x
4x
4x
4x
4x
2x
2x
2x
2x
2x
2x
2x
2x
2x
Printed in Korea
Advertisement
