Samsung DVD-HR735 Instruction Manual page 12

You can only use either the VR or Video
I
mode on a DVD-RW, but not both at the
NOTE
same time.
You can change the DVD-RW to format to
I
another format by reinitializing.
It should be noted that the disc's data will
be lost when changing formats.
Step 3
Recording
There are two different recording methods, Direct
Recording and Timer Recording. Timer recording is
classified as follows:
Recording mode : XP (high quality mode), SP
(standard quality mode), LP (long recording mode),
and EP (extended mode) according to the recording
mode. When recording is set in the FR mode, the best
quality picture is recorded with regards to the
remaining time on the disc.
Step 4
Playing
You can select the title you want to play in a
displayed menu and then immediately start
playback.
A DVD consists of sections, called titles, and sub-
sections, called chapters.
During recording, a title is created between two
points where you start and stop recording.
Chapters will be created automatically when you
finalise recording on DVD-RW/-R discs in Video
mode.
The chapter's length (interval between chapters)
varies according to the recording mode.
12 - English
Step 5 Editing a recorded disc
Editing on discs is easier than conventional video
tapes. The HDD & DVD RECORDER supports many
different edit functions, possible only with DVDs and
HDD.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RW in VR mode, HDD)
With this HDD & DVD RECORDER, you can create a
new playlist on a disc and edit it without the original,
pre-existing recording.
Finalising & Playing on
Step 6
other DVD components
To play your DVD on other DVD components, finalising
may be necessary. First, finish all editing and recording
operations, then finalise the disc.
When using a DVD-RW disc in VR Mode
DVD discs recorded in VR mode can only be played
back in DVD recorders, not players.
When using a DVD-RW disc in Video Mode
The disc should be finalised first to enable playback on
anything other than this HDD & DVD RECORDER. No
more editing or recording can be made on the disc
once it has been finalised.
To enable recording on the disc again, the disc must
be unfinalised.
When using a DVD-R disc
You should finalise the disc to play it on a component
other than this HDD & DVD RECORDER.You cannot
edit or record on the disc once it has been finalised.