Board/Vpr-118 Board/Sy-425 Board/Dc Fan Motor (40) - Sony PMW-1000 Service Manual

6-10. AU-351 Board/VPR-118 Board/SY-425 Board/DC Fan Motor (40)
Preparation
1. Remove the top panel assembly. (Refer to
2. Remove the bottom plate assembly. ( Only when removing the SY-425 board) (Refer to
Assembly")
3. Remove the rear panel. (Refer to
Procedure
1. Insert the end of a screwdriver into the grooves on both sides of the board and move it in the direction of arrow A
to disconnect the AU board assembly from the two connectors on the CN-3594 board in the direction of arrow
B.
Note
• The grooves are located on both sides of the unit.
• The VPR board and the SY board can be removed in the same way.
A
Groove
Screwdriver
2. Disconnect the harness from the connector on the AU board.
3. Remove the screw (PSW2.6 x 6).
PMW-1000
"6-3. Top Panel Assembly")
"6-7. Rear Panel")
Connectors (CN-3594 board)
VPR board
SY board
"6-4. Bottom Plate
AU board assembly
B
6-12