7-5. DC Fan
7-5-1. DC Fan (CPU/MB)
Preparation
Refer to "7-2. Flow Chart".
Procedure
1.
Disconnect the harness from the connector (CN1507) on the MB-1247 board.
2.
Remove the screw (PSW3 x 8), and then remove the fan bracket in the direction of the arrow.
3.
Remove the harness from the edge saddle.
4.
Remove the two screws (PSW3 x 6), and then remove the DC fan (CPU/MB).
PSW
3 x 8
MB-1247 board
CN1507
5.
Install the removed parts by reversing the steps of removal.
Fan bracket
Vibration
proof rubber
Edge saddle
Harness
Label side
DC fan (CPU/MB)
(1-855-519-11)
(For model with PZWK-4030F: 1-855-508-11)
PSW
3 x 6
Front
105