Samsung PS-42P2SB Owner's Instructions Manual page 11

Installing the Display on the Wall Attachment Panel
4
Remove four large screws from the rear side of the display.
Insert the bolts, dish-type washers, and insulation rubber
into the four screw-holes as shown in the figure:
Bolt
Insulation rubber
5
Hang the protruding plastic part on
the rear of the PDP up the groove on
the top of the wall attachment panel.
Then, lift down the PDP. (Do not lift
down the PDP with too much force.
The protruding plastic part might be
taken off.)
Œ
´
11
ENG