Skoda OCTAVIA MK1 Service Manual page 70

Lightly coat head contact surface 1 with
–
sealant -AMV 174 004 01-
7 - Camshaft
– inspecting axial play
– removing and installing
– Slack: max. 0.05 mm
8 - Bucket tappets
– do not interchange
with hydraulic valve clearance
–
compensation
– check → Chapter
lay aside with contact surface facing
–
down
before installing check axial play of the
–
camshaft → Fig.
– oil contact surface
9 - Valve collets
10 - Valve spring retainer
11 - Valve spring
– removing and installing
with cylinder head removed: with -MP 1-
–
211- and -MP 1-213- with valve
supporting plate -MP 1-218-
– with cylinder head installed:
12 - Valve stem seal
– replace → Chapter
13 - Valve guide
– check → Chapter
– replace → Chapter
– Repair of the guide with a collar
14 - Cylinder head
– pay attention to the notes
– reworking valve seats
→ Fig.
→ Chapter
→ Chapter
→ Anchor
→ Chapter
70