Page 1
Square/Round Table Top InSTRuCTIOnS (MTBX22, MTBX30, MTBX36, TTSQ3030, TTSQ3636, TTSQ4242, TTSQ4848, TTRD30, TTRD36, TTRD42, TTRD48) Organize your parts. You will need a phillips head screw driver, crescent wrench, tape measure and pencil, drill(optional). Two people are required for assembly. A. Square Top A2.
Page 2
Step 6: Prepare your Template (INCLUDED) by adhereing both template pages to one another on the dashed line. STEP 7: Turn Table upside down. According to your table top(Square or Round) draw 2 diagonal lines across the table as shown below. STEP 8: Place dot 1, located on the template, directly over the crossing lines.
Remove all wrapping materials, including staples & packing straps before you start to assemble. Do not tighten all screws/bolts until completely assembled. Keep all hardware parts out of reach of children. Any problems or questions please call Regency Office Furniture at 1-866-816-9822...
Page 4
-The Outside dots are for 48” Table tops and MTBX 36 X-Bases. -The Inside dots are for 30”, 36” and 42” Table tops and MTBX 22 & 30 X-Bases. LINE UP TOP EDGE OF SECOND SHEET HERE.
This manual is also suitable for:
Mtbx30Mtbx36Ttsq3030Ttsq3636Ttsq4242Ttsq4848...
Show all