Inner Door Removal
Inner Door Removal Procedure
Step 1.
Move the gas control power switch to the "OFF"
position.
Step 2.
Unplug the water heater from the wall outlet.
Step 3.
Remove the outer door.
Step 4.
Remove (4) 1/4" hex drive screws from the right
side inner door.
Step 5.
Remove (2) 1/4" drive screws from the left side inner door.
Step 6.
Remove the connectors attached to the resettable
thermal switch on the right side inner door.
Page 32
32
Gas control power
switch
Damper (water
heater) power cord
Outer door
(4) 1/4" hex drive
screws
Connectors attached to re-
settable thermal switch
Right side
inner door