Temperature Alerts; Weather Station; How Tall Are The Time Numbers; Power Requirements - La Crosse Technology 308-1711BLV2 Faqs

Hide thumbs Also See for 308-1711BLV2:
Table of Contents

Advertisement

 It is difficult for RF (radio frequency) signal to travel through a hill.

Temperature Alerts

Explanation: The outdoor and indoor temperature alerts are set in two separate steps.
 Set the alert value.
 Arm/Disarm the alert.
Select Temperature Alert Values:
Hold the TEMP ALERT button for five seconds to select and set temperature alert values.
1. OUTDOOR HI alert will flash. Press the ▲ or ▼ buttons to set the alert value, and press the TEMP
ALERT button to confirm and switch to OUTDOOR LOW setting.
2. OUTDOOR LO alert will flash. Press the ▲ or ▼ buttons to set the alert value, and press the TEMP
ALERT button to confirm and switch to INDOOR HI setting.
3. INDOOR HI alert will flash. Press the ▲ or ▼ buttons to set the alert value, and press the TEMP
ALERT button to confirm and switch to INDOOR LOW setting.
4. INDOOR LO alert will flash. Press the ▲ or ▼ buttons to choose the value, and press the TEMP
ALERT button to confirm and exit.
Note: After selecting temperature alert values, use the next step to arm or disarm individual alerts.
Arm/Disarm Temperature Alerts
1. In normal mode, hold then release the TEMP ALERT button to toggle the alerts:
Outdoor HI
Outdoor LO
Indoor HI
Indoor LO
2. Press the ▲ button to arm the selected alert. The alert icon (bell) appears next to the alert, when the
alert is active.
3. Press the ▼ button to disarm the selected alert.
Note: When no temperature alerts are set, the Temperature Alert area will show ALERTS OFF.
Active Temperature Alert
When temperature alert sounds, the corresponding alert icon (bell) will flash.
The alert beeps once every minute, until the temperature is out of alert range.
Press any button to stop alert. The alert symbol will still show.

Weather Station

How tall are the time numbers?

The time numbers are 0.5 inches tall.

Power Requirements

 2-AA Alkaline batteries power this weather station.

12-Hour or 24-Hour time format

 Time can display in 12-hour (am, pm) or 24-hour format.
 Default is 12-hour time.
 Use the
Program Menu

Fahrenheit/Celsius

Use the
program menu
La Crosse Technology, Ltd.
to switch time formats.
to switch between Fahrenheit and Celsius.
www.lacrossetechnology.com/support
Page 7

Advertisement

Table of Contents
loading

Table of Contents