Table of Contents
Advertisement
Manually Set Time/Date: Program Menu ............................................................................... 8
Moon Phase ........................................................................................................................... 9
Weather Station is dim ........................................................................................................... 9
Weather Station has distorted or frozen display ...................................................................... 9
Weather Station is blank: No letters, numbers or dashed lines ..............................................10
Weather Station drains batteries quickly ................................................................................10
Weather Station has missing segments .................................................................................10
Batteries
Explanation: Many problems are resolved with fresh batteries of the appropriate voltage. Many items
sent in under warranty work when tested with fresh batteries. Batteries manufactured this year will have
an expiration date 10 years (or more) in the future. Battery technology has improved and batteries will
maintain voltage longer in storage. However, the environment the batteries reside in for the 10 years can
deplete the power.
We suggest name brand Alkaline batteries for indoor displays.
Use Alkaline or Lithium batteries in the outdoor sensors.
A minimum voltage of 1.48V for each battery is necessary for proper performance.
Use batteries dated at least six years in advance of the current year. Batteries dated earlier than six
years from now may still work, but may be unstable in performance.
Good name brand batteries make less noise, which reduces the chance of RF (radio frequency)
interference from the battery compartment.
Weather Station Factory Restart
Explanation: The factory restart returns the weather station and outdoor sensor to an "out-of-the-box"
state and often resolves an issue.
Factory Restart:
1. Remove all power from outdoor sensor and weather station.
2. Press one of the buttons on the weather station at least 20 times to clear all memory.
3. Verify that the weather station is blank before proceeding (some lines are painted on and will not
disappear).
4. Leave batteries out of both units for 15 minutes (very important).
5. Insert fresh Alkaline batteries into the weather station.
6. Insert fresh batteries into the outdoor sensor.
7. Press the TX button on the outdoor sensor to transmit RF signal.
8. Keep the outdoor sensor 5-10 feet from the weather station.
9. When RF connection is established, the temperature will appear on the station. Allow the outdoor
sensor and weather station to sit together for 15 minutes to establish a strong connection.
10. Do not press buttons for 15 minutes.
For optimum 433MHz transmission, place the outdoor sensor no more than 330 feet (100 meters,
open air) from the weather station.
See the section on
mounting
sensor.
Outdoor Temperature Sensor
Compatible Outdoor Sensors
The TX141TH-Bv3 outdoor sensor comes packaged with this weather station.
The TX141TH-B (all versions) (433MHz) outdoor sensors are compatible with this weather station.
La Crosse Technology, Ltd.
and
distance/resistance/interference
www.lacrossetechnology.com/support
for details on mounting the outdoor
Page 2
Advertisement
Table of Contents
