Martin Audio ADORN ACS-55T User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

V1.0

ADORN

Commercial Series

User Guide

Table of Contents

Summary of Contents for Martin Audio ADORN ACS-55T

Page 1 V1.0 ADORN Commercial Series User Guide...
Page 2: Table Of Contents
ADORN Ceiling Introduction ADORN Ceiling Aesthetics Options Protection Unpacking the Unit ADORN Ceiling Overview ACS-40TS ACS-55TS ACS-55T ACP-55T Accessories ADORN Ceiling System Requirements Low Impedance Systems 70v and 100v Line Systems Connections ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 3 ADORN Ceiling Deployment Hole Cut-outs Suspended Ceilings ADORN Pendant Deployment ACP-55T Technical Specifications A40/A40T A55/A55T ACS-40TS ACS-55TS ACS-55T ACP-55T Technical Drawings A40T A55T ACS-40TS ACS-55TS ACS-55T ACP-55T Warranty Warranty Statement ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 4: Adorn On-Wall Introduction
Martin Audio tonal characteristics. ADORN is an ideal partner to larger Martin Audio systems in venues that may have a wide variety of zones, to provide a seamless transition and retaining the same sonic performance and tonal quality.
Page 5: Adorn On-Wall Overview
For full range music systems, a subwoofer may be added. We would recommend a speaker from the Martin Audio SX Series such as the SX110 which is a very compact single 10” subwoofer. This must be driven by another amplifier, for small low impedance systems the four channel VIA2504 or VIA5004 amplifiers are recommended.
Page 6: Accessories
Allows ceiling-mounting of all ADORN models, featuring vertical tilt. Weatherised for outoor installation. Available in black (CDDCB5B- WR), white (CDDCB5W-WR) and custom RAL colours. Suitable for use with all ADORN on-wall models. Sold seperately. ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 7: Adorn On-Wall System Requirements
We recommend an amplifier that can deliver the full peak power rating without risk of clipping to ensure the best possible performance and to avoid damage. The Martin Audio VIA amplifier range are a good match for the ADORN series. Performance can be further maintained by using a good quality system processor to introduce a system protection limiter.
Page 8: Adorn On-Wall Deployment
Fit the wall bracket in the appropriate orientation for horizontal or vertical adjustment. Fixings appropriate for the wall surface and weight of the cabinet must be used to ensure a safe and secure installation. ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 9: Ceiling-Mounting
Fit the cabinet half of the bracket to the speaker using the four screws in the centre of the rear of the cabinet. For ceiling installation, the bracket must be installed in the orientation below: ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 10 Connect the two assemblies together using the M6 x 60 supplied with we wall bracket. This configuration will give you tilt adjust only. If “pan & tilt” adjustment is needed repeat the above process with the pan and tilt coupler included. ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 11: Adorn Ceiling Introduction
Martin Audio tonal characteristics. ADORN is an ideal partner to larger Martin Audio systems in venues that may have a wide variety of zones, to provide a seamless transition and retaining the same sonic performance and tonal quality.
Page 12: Adorn Ceiling Overview
The consistent and wide 150° conical coverage of the ACP-55T reduces the number of speakers required for even coverage — leading to a reduction in installation cost. ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 13: Accessories
Appropriately sized support ring for ACS-40TS, ACS-55TS and ACS-55T. Supplied with product. Tile rails Support rails for suspended ceiling. Supplied with product. 3m suspension cable accessory for ACP-55T and ACP-55T-W. Sold seperately. ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 14: Adorn Ceiling System Requirements
We recommend an amplifier that can deliver the full peak power rating without risk of clipping to ensure the best possible performance and to avoid damage. The Martin Audio VIA amplifier range are a good match for the ADORN series.
Page 15: Adorn Ceiling Deployment
Screw the C-Bracket in place with the screws provided screwing from the hole side through to the rails. This will make it easier to access the screws if any adjustment is required one the tile and supporting brackets are in the ceiling. ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 16 To fit the speaker, you will need to guide the connector cover and cables into the hole first and then raise the speaker into position flush in the hole. ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 17 The grille is a simple bayonet fitting. Locate the lugs on the underside of the grille and position on the ceiling speaker. Rotate approximately 5° and it will be fixed in place. It can be removed by rotating anticlockwise should any maintenance or adjustment be required. ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 18: Adorn Pendant Deployment
Important safety information • Martin Audio ADORN ceiling speakers must be installed by experienced installation personnel using all accessories appropriate to the ceiling construction • The installer must check with all relevant local, national and international electrical, fire and building safety authorities to ensure that all regulations are being complied with •...
Page 19: Technical Specifications
DIMENSIONS EXCL. BRACKET (W) 152mm x (H) 245mm x (D) 140mm (W) 6in x (H) 9.6in x (D) 5.5in WEIGHT A55: 2.21kg (4.9lbs) A55T: 2.81kg (6.2lbs) ACCESSORIES Waterproof connector cover ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 20: Acs-40Ts
Ceramic connector (in and link) located behind fire-retardant steel cover ACCESSORIES (included) 2 tile rails, C-ring backing plate, Cut-out template DIMENSIONS (OD) 245mm x (D) 193mm (OD) 9.7in x (D) 7.6in WEIGHT 3kg (6.6lbs) ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 21: Acp-55T
1 metre. (9) Calculated at 1 metre. (10) Measured in half (2pi) space at 2 metres with 2.83V input, using band limited pink noise, then referred to 1 metre. ADORN USER GUIDE V1.0 Copyright © 2020 Martin Audio Ltd.
Page 30: Warranty
Martin Audio ADORN series loudspeakers are warranted against manufacturing defects in materials or craftsmanship over a period of 5 years from the date of original purchase. During the warranty period Martin Audio will, at its discretion, either repair or replace products which prove to be defective provided that the product is returned in its original packaging, shipping prepaid, to an authorised Martin Audio service agent or distributor.
Page 31 All information is Copyright © 2020 Martin Audio Ltd. Martin Audio, the Martin Audio logo and Hybrid are registered trademarks of Martin Audio Ltd. in the United Kingdom, United States and other countries; all other Martin Audio trademarks are the property of Martin Audio Ltd.

This manual is also suitable for:

Adorn acp-55t Adorn acs-55ts Adorn acs-40ts Adorn a55 Adorn a55t Adorn a40 ... Show all

Martin Audio ADORN ACS-55T User Manual

ADORN On-Wall Introduction

ADORN On-Wall Overview

ADORN On-Wall System Requirements

ADORN On-Wall Deployment

ADORN Ceiling Introduction

ADORN Ceiling Overview

ADORN Ceiling System Requirements

ADORN Ceiling Deployment

ADORN Pendant Deployment

Technical Specifications

Technical Drawings

Warranty

Quick Links

Related Manuals for Martin Audio ADORN ACS-55T

Summary of Contents for Martin Audio ADORN ACS-55T

This manual is also suitable for:

Table of Contents