Roland Fantom-G Series Workshop page 14

If you change the control source assigned to the System Control, you
therefore automatically change the control source of any sound set to use
it.
All of the factory patches are set by default to use System Controls 1-4 as
their four control sources. As a result, it's easy to change a control source
for all of these patches at once by simply changing a System Control to
whatever it is you want to use.
As you program your own patches, you can use something other than
the default assignment as a System Control's control source if you prefer.
Changing your mind about what you want to use in all of your patches at any
time is a trivial matter, thanks to the helpful System Controls.
Here's how to assign a System Control Source:
Press the MENU button.
1
Click F2 (System).
2
Use F2 (Group/Down) to select the System Ctrl parameter group.
3
Set the desired System Control's System Control Source parameter to
4
the desired value.
The End
We hope you've found this workshop helpful. Keep an eye out for other
Fantom-G Workshop booklets available for downloading at www.RolandUS.
com.
14