Rack Mounting - ZyXEL Communications GS1100-16 User Manual

Chapter 2 Hardware Description and Connection
Align the holes on the back of the Switch with the screws on the wall. Hang the
2
Switch on the screws.
The Switch should be wall-mounted horizontally. The Switch's side
panels with ventilation slots should not be facing up or down as
this position is less safe.

2.3.2 Rack Mounting

Attaching the Mounting Brackets to the Switch
Position a mounting bracket on one side of the Switch, lining up the four screw
1
holes on the bracket with the screw holes on the side of the Switch.
Figure 6 Attaching the Mounting Brackets
Using a #2 Philips screwdriver, install the M3 flat head screws through the
2
mounting bracket holes into the Switch.
Repeat steps
3
the Switch.
You may now mount the Switch on a rack. Proceed to the next section.
4
10
1 and 2 to install the second mounting bracket on the other side of
GS1100-16 User's Guide