Bradford White 238-47808-00A Installation And Operation Manual page 8

Installing the Setback Control
Installing Setback Control
Step 5: Using the Setback Control Junction Box Assembly (already installed on water heater), snap the
Setback Control into the backplate connected to the Setback Control Junction Box Assembly, as shown in
Figure 5.
Powering the Water Heater and Setback Control
Step 6: Plug in the water heater and the transformer to power the Setback Control. This is shown in
Figure 6.
Setback Control
Figure 5
Figure 6
-8-
Setback Control
Junction Box Assembly
Backplate
already installed
Transformer