Changing The Batteries - Bradford White 238-47808-00A Installation And Operation Manual

Changing the Batteries

Removal of Battery Holder
Step 3: Remove the battery holder by depressing its top edge and pulling the holder to the right, as
shown in Figure 31.
Replacement of Batteries
Step 4: Replace the two batteries with (2) AAA batteries. The batteries should be oriented, as shown in
Figure 32.
Re-installation of Battery Holder
Step 5: Replace the battery holder with the new batteries by depressing the top side of the battery holder
and pushing on the right side of the holder. This is shown in Figure 33.
Battery
Holder
Figure 31
Figure 32
Figure 33
-22-
Top of Setback Control
(seen from back side)
Battery
Holder