ZyXEL Communications P-660W-Tx v2 Quick Start Manual page 11

Zyxel communications adsl router over pots/isdn quick start guide

Hide thumbs Also See for P-660W-Tx v2:

2 Select the ESSID name you gave the P-

660W-Tx v2 and click Connect. (The ESSID

used here is an example.)

3 If you have set up wireless security, you are

prompted to enter a password. Enter the Pre-

Shared Key you set up in the previous section and

click Connect.

4 If you connected successfully, a message similar to the following

displays.

If you cannot connect wirelessly to the P-660W-Tx v2, check that you are

using the same ESSID and security key on both the P-660W-Tx v2 and

your wireless client.

5 Congratulations! That completes the setup procedure for your P-660W-Tx v2. Open a

web browser, such as Internet Explorer, to visit your favorite website.

1 Go to www.zyxel.com.

2 Select your product from the drop-down list box on the ZyXEL home

page to go to that product's page.

3 Select the certification you wish to view from this page.

P-660W-Tx v2 Quick Start Guide

Procedure to View a Product's Certification(s)

Table of Contents

P-660w-t1 v2