Figure 33 Basic: Wan: Pppoe; Table 15 Basic: Wan: Pppoe - ZyXEL Communications ZyXEL NBG-415N User Manual

ZyXEL NBG-415N User's Guide

Figure 33 Basic: WAN: PPPoE

The following table describes the related fields in this screen.

Table 15 Basic: WAN: PPPoE

LABEL
MODES
WAN
PPPoE WAN
MODE
Address Mode
IP Address
User Name
Password
Verify Password
47
DESCRIPTION
Select PPPoE if your ISP gives you Internet access account information (such as
the username and password).
Select Dynamic IP If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static IP If your ISP assigned a fixed IP address. The set the following
fields.
This field is applicable if you select Static IP in the Address Mode field.
Enter the IP address that your ISP gave you. This should be a static, public IP
address.
Type the user name given to you by your ISP. You can use alphanumeric and -
_@$./ characters, and it can be up to 31 characters long.
Type the password associated with the user name above. Use up to 64 ASCII
characters except the [, ] and ?. This field can be blank.
Type your password again for confirmation.
Chapter 4 WAN