Select Dynamic to have the HomeSafe automatically use short preamble when all wireless clients
support it, otherwise the HomeSafe uses long preamble.
The HomeSafe and the wireless stations MUST use the
same preamble mode in order to communicate.
7.4
Configuring WEP Encryption
In order to configure and enable WEP encryption; click the WIRELESS link under
ADVANCED to display the Wireless screen. Select Static WEP from the Security list.
Figure 7-4 WLAN : Wireless : Static WEP Encryption
The following table describes the wireless LAN security labels in this screen.
Table 7-3 WLAN : Wireless : Static WEP Encryption
LABEL
WEP
Select 64-bit WEP or 128-bit WEP to enable data encryption.
Encryption
Authentication
This field is activated when you select 64-bit WEP or 128-bit WEP in the WEP
Method
Encryption field.
Select Auto, Open System or Shared Key from the drop-down list box.
ASCII
Select this option in order to enter ASCII characters as the WEP keys.
Hex
Select this option in order to enter hexadecimal characters as the WEP keys.
The preceding "0x", that identifies a hexadecimal key, is entered automatically.
Wireless Security
DESCRIPTION
HomeSafe User's Guide
7-5