ZyXEL Communications PRESTIGE 153 User Manual page 94

Prestige 153/153X WAN Bridge/Routers
The following table shows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer
Options.
Table 5-2. Remote Node TCP/IP Configuration
Rem IP Address
Rem IP Subnet
Mask
My WAN Addr
Single User
Account
Server IP address
5-4
This shows the IP address you entered for this remote node in
the previous menu, Remote Node Profile.
Enter the subnet mask for the remote network.
Some implementations, especially the UNIX derivatives,
require the WAN link to have a separate IP network number
from the LAN and each end must have a unique address within
the WAN network number. If this is the case, enter the IP
address assigned to the WAN port of your Prestige.
Note that this is the address assigned to your local Prestige,
not the remote router.
(See Figure 5-3 for an explanation of My WAN Addr. With
Sample IP Addresses)
Set this field to [Yes] to enable the Single User Account feature
for your Prestige. Use the space bar to toggle between [Yes]
and [No]. See Chapter 3 - Internet Access Application for more
information on the Single User Account feature.
If you enable the Single User Account feature and you want to
make a server on your LAN accessible to the outside world,
enter that server's inside IP address here.
Remote Node TCP/IP Configuration
[Yes/No]