Command Description - ZyXEL Communications P-871M User Manual

Command
sys
help
exit
passwd
default
upgrade
<fw|conf>
vdsl uprate [x]
vdsl downrate
[y]
vdsl snr [z]
vdsl interleave
[i]
vdsl profile
[1|2]
vdsl reset
vdsl reconnect
P-871M User's Guide
Description
Displays the system information and port
settings, including the current firmware version
and VDSL data rate.
lt=line termination, means CO mode;
nt=network termination, means CPE mode
Displays all available commands.
Logs you out of the CLI.
Changes the system login password.
Returns the P-871M to the factory defaults.
Uploads the P-871M's firmware or
configuration file.
Displays or sets the VDSL upstream data rate.
x
: Enter the rate from 2000 to 100000 in Kbps.
Displays or sets the VDSL downstream data
rate.
y
: Enter the rate from 2000 to 100000 in Kbps.
Displays or sets the VDSL SNR margin.
z
: Enter the SNR margin from 0 to 24 in dB.
Displays or sets the VDSL interleave delay.
i
: Enter the interleave delay from 0 to 100 in
0.5 ms (milisecond).
Displays or sets the VDSL profile.
1
: 12a, PSD:998-M1x-B
2
: 12a, PSD:997-M1x-M
Resets the VDSL chipset.
Forces the P-871M to re-build up the VDSL
connection.
8