Status Page - ZyXEL Communications G.SHDSL.bis Router P-791R v2 Quick Start Manual

Look at the LEDs
• The POWER LED blinks green while your P-791R v2 starts up and stays on when it is
ready.
• The DSL LED blinks while the P-791R v2 is trying to establish a connection with the ISP
and stays on when the connection is established.
• The ETHERNET LED stays on if the ETHERNET port is properly connected and blinks
when there is traffic.
If any of these LEDs are off, check your connections, and inspect your
cables for damage. If the LEDs are still off, contact your local vendor.

2 Status Page

Use the status screen to view basic setup information.
1 Open your Internet browser, and enter
http://192.168.1.1.
If you cannot access the web configurator, make sure you allow pop-up
windows and JavaScripts and set up Java permissions appropriately. See
the User's Guide for more information and further troubleshooting tips.
Make sure your computer's IP address is in the same subnet as the P-791R
v2's LAN IP address.
P-791R v2 Quick Start Guide
3