SAFE OPERATION
10
CARE OF DANGER, WARNING AND CAUTION LABELS
1. Keep danger, warning and caution labels clean and free from obstructing material.
2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing danger, warning and caution labels with new labels from
your local KUBOTA Dealer.
4. If a component with danger, warning and caution label(s) affixed is replaced with new
part, make sure new label(s) is (are) attached in the same location(s) as the replaced
component.
5. Mount new danger, warning and caution labels by applying on a clean dry surface and
pressing any bubbles to outside edge.