Accessing Your Zywall Via Web Configurator - ZyXEL Communications ZyXEL ZyWALL 30W Quick Start Manual

3.1 Accessing Your ZyWALL Via Web Configurator

Step 1. Launch your web browser. Enter "192.168.1.1" as the web site address.
Step 2. The default password ("1234") is already in the password field (in non-readable format). Click
Login to proceed to a screen asking you to change your password. Click Reset to revert to the
default password in the password field.
Step 3.
It is highly recommended you change the default password! Enter a new password, retype it to
confirm and click Apply; alternatively click Ignore to proceed to the main menu if you do not
want to change the password now.
Step 4.
You should now see the web configurator MAIN MENU screen.
Click WIZARD to begin a series of screens to help you configure your ZyWALL for the first time.
Click a link under ADVANCED in the navigation panel to configure that ZyWALL feature.
Click MAINTENANCE in the navigation panel to see ZyWALL performance statistics, upload
firmware and back up, restore or upload a configuration file.
Click LOGOUT when you have finished a ZyWALL management session. The ZyWALL
automatically logs you out if it is left idle for five minutes; press ENTER to display the Login
screen again and then log back in. This idle timeout timer is one of the many ZyWALL features that
you may edit using the web configurator.
ZyWALL 30W
Web site address.
7
Default password.
Change default password.