Setting Up Your Computer's Ip Address - ZyXEL Communications ZyXEL ZyWALL 30W Quick Start Manual

LED COLOR
WLAN Green
LAN 10M Green
LAN 100M Orange
WAN 10M Green
WAN 100M Orange
CON/AUX Green
Orange

2 Setting Up Your Computer's IP Address

Skip this section if your computer is already set up to accept a dynamic IP
The ZyWALL is already set up to assign your computer an IP address. Use this section to set up your
computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range
STATUS
Off The wireless LAN is not ready, or has failed.
On The wireless LAN is OK.
Flashing The wireless LAN is sending or receiving packets.
Off The 10M LAN is not connected.
On The ZyWALL is connected to a 10M LAN.
Flashing The 10M LAN is sending or receiving packets.
Off The 100M LAN is not connected.
On The ZyWALL is connected to a 100Mbps LAN.
Flashing The 100M LAN is sending or receiving packets.
Off The 10M WAN link is not ready, or has failed.
On The 10M WAN link is OK.
Flashing The 10M WAN link is sending or receiving packets.
Off The 100M WAN link is not ready, or has failed.
On The 100M WAN link is OK.
Flashing The 100M WAN link is sending or receiving packets.
Off The CON/AUX link is not ready, or has failed.
On The CON/AUX switch is set to CON and the CON/AUX port is
connected to a management computer.
Off The CON/AUX link is not ready, or has failed.
On The CON/AUX switch is set to AUX and the CON/AUX port has
an Internet connection through a dial-up modem.
Flashing The CON/AUX switch is set to AUX and the CON/AUX port is
sending or receiving data through a dial-up modem.
address. This is the default for most new computers.
ZyWALL 30W
MEANING
4