ZyXEL Communications ZyXEL ZyAIR NWA-3100 Quick Start Manual page 6

Close the Network Connections window.
2.2 Log Into the Web Configurator
Even though you can connect to the NWA-3100 wirelessly, it is
recommended that you connect your computer to the ETHERNET port for
initial configuration.
1 Launch your web browser. Enter
192.168.1.2 (the NWA-3100's default
IP address) as the address.
If you cannot access the Web configurator, make sure the IP addresses
and subnet masks of the NWA-3100 and the computer are in the same IP
address range (see Section 2.1).
2 Click Login (the default password
1234 is already entered).
3 Change the login password by
entering a new password and
clicking Apply. Be sure to record the
new password and keep it in a safe
place.
ENGLISH
5