Figure 23 Profile: Wireless Setting: Select A Channel; Table 16 Profile: Wireless Setting: Select A Channel - ZyXEL Communications ZyXEL Prestige 202 User Manual

ZyXEL M-202 User's Guide
Table 15 Profile: Add New Profile (continued)
LABEL
,
,
or
SSID
Scan
Select
2 If you select the Infrastructure network type in the previous screen, skip to step 3. If you
select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a channel number and click Next to continue.

Figure 23 Profile: Wireless Setting: Select a Channel

The following table describes the labels in this screen.

Table 16 Profile: Wireless Setting: Select a Channel

LABEL
Wireless Setting
Channel
Back
Next
Exit
46
DESCRIPTION
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless security
is deactivated.
This field displays the SSID (Service Set IDentifier) of each wireless device.
Click Scan to search for available wireless devices within transmission range.
Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the ZyXEL M-202 associates to the selected
wireless network only.
DESCRIPTION
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Click Back to return to the Add New Profile screen.
Click Next to confirm your selection and advance to the Encryption Type screen.
Click Exit to discard changes and return to the Add New Profile screen.
Chapter 3 ZyXEL Utility Configuration