Connecting To A Wlan Network; Security Settings; Wep Encryption; Figure 16 Security Settings: Wep - ZyXEL Communications ZyXEL Prestige 202 User Manual

ZyXEL M-202 User's Guide
Table 8 Site Survey (continued)
LABEL
MAC address
Surveyed at

3.2.1 Connecting to a WLAN Network

Follow the steps below to connect to a WLAN network using the Site Survey screen.
1 Click Scan to search for all available wireless networks within range.
2 To join a network, click an entry in the table to select a wireless network and then click
Connect.
3 If the WEP encryption is activated for the selected wireless network, the Security Setting
screen displays. You must set the related fields in the Security Setting screen to the same
security settings as the associated wireless device. Refer to
more information.
Otherwise click the Back or Exit button and connect to another wireless network without
data encryption.
4 Verify that you have successfully connected to the selected network and check the
network information in the Link Info screen.

3.2.2 Security Settings

When you configure the ZyXEL M-202 to connect to a network with wireless security
activated and the security settings are disabled on the ZyXEL M-202, the screen varies
according to the encryption method used by the selected network.

3.2.2.1 WEP Encryption

Figure 16 Security Settings: WEP

38
DESCRIPTION
This field displays the MAC address of the wireless device.
This field displays the time when the wireless device is scanned.
Section 3.2.2 on page 38
Chapter 3 ZyXEL Utility Configuration
for