Initial Configuration - ZyXEL Communications Prestige 2002 Series Quick Start Manual

1 In Windows XP, click start, Control Panel.
In Windows 2000/NT, click Start, Settings, Control
Panel.
2 In Windows XP, click Network Connections.
In Windows 2000/NT, click Network and Dial-up
Connections.
3 Right-click Local Area Connection and then click
Properties.
4 Select Internet Protocol (TCP/IP) (under the
General tab in Windows XP) and click Properties.
5 The Internet Protocol TCP/IP Properties screen
opens (the General tab in Windows XP).
6 Select Use the following IP address and fill in the
IP address (choose one from192.168.5.2 to
192.168.5.254) and Subnet mask (255.255.255.0)
fields.
7 Click OK to close the Internet Protocol (TCP/IP)
Properties window.
8 Click Close (OK in Windows 2000/NT) to close the
Local Area Connection Properties window.
9 Close the Network Connections screen.

3 Initial Configuration

Your voice service provider may assign the Prestige's settings automatically. If the PWR/VoIP LED turns
orange, you can skip to
stays green or you want to configure the Prestige 2002L for making regular calls.
1 Launch your web browser. Enter
"192.168.5.1" (the Prestige's default
management IP address) as the web
site address.
Prestige 2002 Series
Section 4.1 to make calls through the Internet. Use this section if the PWR/VoIP LED
6