1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Telephone Accessories
  5. Prestige P-2002 Series
  6. User manual

ZyXEL Communications Prestige P-2002 Series User Manual

Voip analog telephone adaptor
Hide thumbs Also See for Prestige P-2002 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
P-2002 Series
VoIP Analog Telephone Adaptor
User's Guide
Version 3.60
10/2005

Advertisement

Table of Contents
loading

Related Manuals for ZyXEL Communications Prestige P-2002 Series

Summary of Contents for ZyXEL Communications Prestige P-2002 Series

  • Page 1 P-2002 Series VoIP Analog Telephone Adaptor User’s Guide Version 3.60 10/2005...

  • Page 3: Copyright

    ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved.

  • Page 4: Federal Communications Commission (Fcc) Interference Statement

    P-2002 Series User’s Guide Federal Communications Commission (FCC) Interference This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operations.
  • Page 5 P-2002 Series User’s Guide Federal Communications Commission (FCC) Interference Statement...

  • Page 6: Safety Warnings

    P-2002 Series User’s Guide For your safety, be sure to read and follow all warning notices and instructions. • To reduce the risk of fire, use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord. • Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks.

  • Page 7: Zyxel Limited Warranty

    P-2002 Series User’s Guide ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two years from the date of purchase. During...

  • Page 8: Customer Support

    P-2002 Series User’s Guide Please have the following information ready when you contact customer support. • Product model and serial number. • Warranty Information. • Date that you received your device. • Brief description of the problem and the steps you took to solve it.
  • Page 9 TELEPHONE WEB SITE FTP SITE +44 (0) 1344 303044 www.zyxel.co.uk 08707 555779 (UK only) +44 (0) 1344 303034 ftp.zyxel.co.uk P-2002 Series User’s Guide REGULAR MAIL ZyXEL Communications UK Ltd.,11 The Courtyard, Eastern Road, Bracknell, Berkshire, RG12 2XB, United Kingdom (UK)
  • Page 10 P-2002 Series User’s Guide Customer Support...

  • Page 11: Table Of Contents

    2.3.1 Procedure To Use The Reset Button ...31 2.4 Navigating the Prestige Web Configurator ...31 2.5 Common Screen Command Buttons ...33 Chapter 3 System Screens ... 35 3.1 System Overview ...35 Table of Contents P-2002 Series User’s Guide Table of Contents...
  • Page 12 P-2002 Series User’s Guide 3.2 General Setup ...35 3.2.1 Domain Name ...35 3.3 General Setup Configuration ...35 3.4 Configuring Password ...36 3.5 Pre-defined NTP Time Servers List ...37 3.6 Configuring Time Setting ...37 Chapter 4 Ethernet Screens... 41 4.1 ETHERNET Overview ...41 4.1.1 IP Address and Subnet Mask ...41...
  • Page 13 7.3.2.4 European Three-Way Conference ...71 7.3.3 USA Type Supplementary Services ...71 7.3.3.1 USA Call Hold ...71 7.3.3.2 USA Call Waiting ...72 7.3.3.3 USA Call Transfer ...72 7.3.3.4 USA Three-Way Conference ...72 7.4 Common Phone Configuration ...72 Table of Contents P-2002 Series User’s Guide...
  • Page 14 P-2002 Series User’s Guide Chapter 8 Phone Book ... 75 8.1 Phone Book Introduction ...75 8.1.1 Speed Dial ...75 8.1.1.1 Peer-to-Peer Calls ...75 8.1.2 Lifeline (Prestige 2002L) ...75 8.2 Speed Dial Configuration ...75 8.3 Call Forward ...77 8.4 Lifeline Configuration (Prestige 2002L) ...80 Chapter 9 Logs...
  • Page 15 Appendix A Product Specifications ... 107 Appendix B Setting up Your Computer’s IP Address... 111 Appendix C IP Subnetting ... 123 Appendix D PPPoE ... 131 Appendix E Internal SPTGEN ... 133 Index... 161 Table of Contents P-2002 Series User’s Guide...
  • Page 16 P-2002 Series User’s Guide Table of Contents...

  • Page 17: List Of Figures

    P-2002 Series User’s Guide List of Figures Figure 1 LEDs ... 26 Figure 2 Internet Telephony Service Provider Application ... 27 Figure 3 IP-PBX Application ... 27 Figure 4 Peer-to-peer Calling ... 28 Figure 5 Web Configurator IP Address ... 30 Figure 6 Enter Password ...
  • Page 18 P-2002 Series User’s Guide Figure 39 Configuration ... 89 Figure 40 Configuration Upload Successful ... 90 Figure 41 Network Temporarily Disconnected ... 90 Figure 42 Reset Warning Message ... 91 Figure 43 Restart Screen ... 91 Figure 44 Pop-up Blocker ... 99 Figure 45 Internet Options ...

  • Page 19: List Of Tables

    P-2002 Series User’s Guide List of Tables Table 1 LED Descriptions ... 26 Table 2 Web Configurator Screens Summary ... 32 Table 3 Common Screen Command Buttons ... 33 Table 4 System General ... 36 Table 5 Password ... 37 Table 6 Pre-defined NTP Time Servers ...
  • Page 20 P-2002 Series User’s Guide Table 39 Troubleshooting Telephone ... 98 Table 40 Troubleshooting Voice Service ... 98 Table 41 Device Specifications ... 107 Table 42 Feature Specifications ... 108 Table 43 Power Adaptor Specifications ... 109 Table 44 Classes of IP Addresses ... 123 Table 45 Allowed IP Address Range By Class ...

  • Page 21: Preface

    Help us help you. E-mail all User Guide-related comments, questions or suggestions for improvement to techwriters@zyxel.com.tw or send regular mail to The Technical Writing Team, ZyXEL Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, Hsinchu, 300, Taiwan. Thank you.

  • Page 22: Graphics Icons Key

    P-2002 Series User’s Guide • Mouse action sequences are denoted using a comma. For example, “click the Apple icon, Control Panels and then Modem” means first click the Apple icon, then point your mouse pointer to Control Panels and then click Modem.

  • Page 23: Introducing The Prestige

    100 Mbps in either half-duplex or full-duplex mode depending on your Ethernet network. Some features documented in this user’s guide were not available in the Prestige 2002L at the time of writing. Chapter 1 Introducing the Prestige P-2002 Series User’s Guide H A P T E R...
  • Page 24 P-2002 Series User’s Guide Auto-crossover 10/100 Mbps Ethernet Interfaces The Ethernet interfaces automatically adjust to either a crossover or straight-through Ethernet cable. PSTN Lifeline The Prestige 2002L has a LINE port for connecting a PSTN line. You can receive incoming PSTN phone calls even while someone else connected to the Prestige is making VoIP phone calls.

  • Page 25: Leds

    Your Prestige is designed for quick, intuitive and easy installation. Physically, its compact size and lightness make it easy to position anywhere in your busy office. 1.4 LEDs The following graphic displays the labels of the LEDs. Chapter 1 Introducing the Prestige P-2002 Series User’s Guide...

  • Page 26: Applications

    P-2002 Series User’s Guide Figure 1 LEDs Table 1 LED Descriptions COLOR STATUS PWR/VoIP Green Orange Green Green Phone 1-2 Green 1.5 Applications Here are some examples of how you can use your Prestige. 1.5.1 Make Calls via Internet Telephony Service Provider In a home or small office environment, you can use the Prestige to make and receive VoIP telephone calls through an Internet Telephony Service Provider (ITSP).

  • Page 27: Make Calls Via Ip-Pbx

    Use the Prestige to make a call to the recipient’s IP address without using a SIP proxy server Peer-to-peer calls are also called “Point to Point” or “IP-to-IP” calls. You must know the peer’s IP address in order to do this. Chapter 1 Introducing the Prestige P-2002 Series User’s Guide...

  • Page 28: Figure 4 Peer-To-Peer Calling

    P-2002 Series User’s Guide The following figure shows a basic example of how you would make a peer-to-peer VoIP call. You use your analog phone (A in the figure) and the Prestige (B) changes the call into VoIP. The Prestige then sends your call through your modem or router (C) and the Internet to the peer VoIP device (D).

  • Page 29: Introducing The Web Configurator

    Prestige, make sure your computer’s IP address is in the same subnet as the Prestige’s IP address or management IP address that you want to access. Chapter 2 Introducing the Web Configurator H A P T E R Introducing the Web Configurator P-2002 Series User’s Guide...

  • Page 30: Figure 5 Web Configurator Ip Address

    P-2002 Series User’s Guide Figure 5 Web Configurator IP Address 4 Type "1234" (default) as the password and click Login. In some versions, the default password appears automatically - if this is the case, click Login. Figure 6 Enter Password 5 You should see a screen asking you to change your password (highly recommended) as shown next.

  • Page 31: Resetting The Prestige

    The following summarizes how to navigate the web configurator from the MAIN MENU screen. Note: Click the Help icon (located in the top right corner of most screens) to view online help. Click a link under ADVANCED to configure Prestige features. Chapter 2 Introducing the Web Configurator P-2002 Series User’s Guide...

  • Page 32: Figure 8 Web Configurator

    P-2002 Series User’s Guide Figure 8 Web Configurator The following table describes the navigation panel and sub-menus. Table 2 Web Configurator Screens Summary LINK SYSTEM General Password Time Setting ETHERNET Ethernet MGNT VOIP VoIP PHONE Phone Port PHONE BOOK Speed Dial...

  • Page 33: Common Screen Command Buttons

    The following table shows common command buttons found on many web configurator screens. Table 3 Common Screen Command Buttons Apply Click Apply to save your changes back to the Prestige. Reset/Cancel Click Reset or Cancel to begin configuring this screen afresh. Chapter 2 Introducing the Web Configurator P-2002 Series User’s Guide...
  • Page 34 P-2002 Series User’s Guide Chapter 2 Introducing the Web Configurator...

  • Page 35: Chapter 3 System Screens

    Prestige via DHCP. 3.3 General Setup Configuration Click SYSTEM in the navigation panel and then General Setup to display the following screen. Chapter 3 System Screens P-2002 Series User’s Guide H A P T E R System Screens...

  • Page 36: Configuring Password

    P-2002 Series User’s Guide Figure 9 System General Table 4 System General LABEL DESCRIPTION System Name This is for identification purposes. Enter your computer's "Computer Name". Domain Name The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the domain name obtained by DHCP from the ISP is used.

  • Page 37: Pre-Defined Ntp Time Servers List

    Use up to 32 ASCII characters. Type the new password in this field. Type the new password again in this field. Click Apply to save your changes back to the Prestige. Click Reset to begin configuring this screen afresh. P-2002 Series User’s Guide...

  • Page 38: Figure 11 Time Setting

    P-2002 Series User’s Guide Figure 11 Time Setting The following table describes the labels in this screen. Table 7 Time Setting LABEL DESCRIPTION Time Protocol Select the time service protocol that your time server sends when you turn on the Prestige.
  • Page 39 Enter the month and day that your daylight-savings time ends on if you selected Daylight Savings. Apply Click Apply to save your changes back to the Prestige. Reset Click Reset to begin configuring this screen afresh. Chapter 3 System Screens P-2002 Series User’s Guide...
  • Page 40 P-2002 Series User’s Guide Chapter 3 System Screens...

  • Page 41: Chapter 4 Ethernet Screens

    • If the ISP did not give you DNS server information, leave the DNS Server fields set to 0.0.0.0 for the ISP to dynamically assign the DNS server IP addresses. Chapter 4 Ethernet Screens P-2002 Series User’s Guide H A P T E R Ethernet Screens...

  • Page 42: Pppoe Encapsulation

    P-2002 Series User’s Guide 4.1.3 PPPoE Encapsulation Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an IETF (Internet Engineering Task Force) draft standard specifying how a host personal computer interacts with a broadband modem (for example DSL, cable, wireless, etc.) to achieve access to high-speed data networks.

  • Page 43: Figure 12 Ethernet

    Enter the user name exactly as your ISP assigned it (maximum 72 characters). Enter the password exactly as your ISP assigned it. Click Apply to save your changes back to the Prestige. Click Reset to begin configuring this screen afresh. P-2002 Series User’s Guide...

  • Page 44: Configuring The Ethernet Management Port

    P-2002 Series User’s Guide 4.3 Configuring the Ethernet Management Port Click ETHERNET in the navigation panel and then Mgnt Port to open the following screen. Use the ETHERNET Mgnt Port screen to configure a static IP address through which you can manage the Prestige.

  • Page 45: Introduction To Voip

    The SIP service domain of the VoIP service provider is the domain name in a SIP URI. For example, if the SIP address is 1122334455@VoIP-provider.com, then “VoIP-provider.com” is the SIP service domain. Chapter 5 Introduction to VoIP H A P T E R Introduction to VoIP P-2002 Series User’s Guide...

  • Page 46: Sip Call Progression

    P-2002 Series User’s Guide 5.2.2 SIP Call Progression The following figure displays the basic steps in the setup and tear down of a SIP call. A calls Table 10 SIP Call Progression 1. INVITE 4. ACK 5.Dialogue (voice traffic) 6. BYE 1 A sends a SIP INVITE request to B.

  • Page 47: Sip Proxy Server

    2 The SIP redirect server sends the invitation back to A with C’s IP address (or domain name). 3 Client device A then sends the call invitation to client device C. Chapter 5 Introduction to VoIP P-2002 Series User’s Guide...

  • Page 48: Sip Register Server

    P-2002 Series User’s Guide Figure 16 SIP Redirect Server 5.2.3.4 SIP Register Server A SIP register server maintains a database of SIP identity-to-IP address (or domain name) mapping. The register server checks your user name and password when you register.

  • Page 49: Nat Example

    This section discusses the following NAT types that may be implemented on a router in front of the Prestige. • Full Cone • Restricted Cone • Port Restricted Cone • Symmetric Chapter 5 Introduction to VoIP P-2002 Series User’s Guide...

  • Page 50: Full Cone Nat

    P-2002 Series User’s Guide The following table summarizes how these NAT types handle outgoing and incoming packets. Read the following sections for more details and examples. Table 11 NAT Types FULL CONE Incoming Any external host Packets can send packets to...

  • Page 51: Restricted Cone Nat

    1, port A. Packets have not been sent from 1, A to 3 or 5, so 3 and 5 cannot send packets to 1, A. Figure 20 Restricted Cone NAT Example Chapter 5 Introduction to VoIP P-2002 Series User’s Guide...

  • Page 52: Port Restricted Cone Nat

    P-2002 Series User’s Guide 5.3.2.3 Port Restricted Cone NAT As in full cone NAT, a port restricted cone NAT router maps all outgoing packets from an internal IP address and port to a single IP address and port on the external network. In the following example, the NAT router maps the source address of all packets sent from internal IP address 1 and port A to IP address 2 and port B on the external network.

  • Page 53: Nat And Sip

    NAT feature to manually configure the Prestige to use a them in the SIP messages. This eliminates the need for STUN or a SIP ALG. You must also configure the NAT router to forward traffic with the SIP port number to the Prestige. Chapter 5 Introduction to VoIP P-2002 Series User’s Guide...

  • Page 54: Stun

    P-2002 Series User’s Guide 5.4.3 STUN STUN (Simple Traversal of User Datagram Protocol (UDP) through Network Address Translators) allows the Prestige to find the presence and types of NAT routers and/or firewalls between it and the public Internet. STUN also allows the Prestige to find the public IP address that NAT assigned, so the Prestige can embed it in the SIP data stream.

  • Page 55: G.711

    (beeping) dial tone when you have a voice message(s). Your voice service provider must have a messaging system that sends message waiting status SIP packets as defined in RFC 3842. The Prestige does not support pulse dialing at the time of writing. Chapter 5 Introduction to VoIP P-2002 Series User’s Guide...
  • Page 56 P-2002 Series User’s Guide Chapter 5 Introduction to VoIP...

  • Page 57: Chapter 6 Voip Screens

    Click VoIP in the navigation panel to display the following screen. Use this screen to configure the Prestige’s VoIP settings. You should have a voice account already set up and have VoIP information from your VoIP service provider. Chapter 6 VoIP Screens P-2002 Series User’s Guide H A P T E R VoIP Screens...

  • Page 58: Figure 24 Voip

    P-2002 Series User’s Guide Figure 24 VoIP Table 12 VoIP LABEL DESCRIPTION SIP Account You can configure the Prestige to use multiple SIP accounts. Select one to configure its settings on the Prestige. Active Select this check box to have the Prestige use this SIP account. Clear the check box to have the Prestige not use this SIP account.

  • Page 59: Custom Tones (Ivr)

    1 Pick up the phone and press “****” on your phone’s keypad and wait for the message that says you are in the configuration menu. Chapter 6 VoIP Screens P-2002 Series User’s Guide SIP Server Address field again here. Server Port field again here.

  • Page 60: Listening To Custom Tones

    P-2002 Series User’s Guide 2 Press a number from 1101~1108 on your phone followed by the “#” key. 3 Play your desired music or voice recording into the receiver’s mouthpiece. Press the “#” key. 4 You can continue to add, listen to, or delete tones, or you can hang up the receiver when you are done.

  • Page 61: Figure 25 Voip Advanced

    P-2002 Series User’s Guide Figure 25 VoIP Advanced Chapter 6 VoIP Screens...

  • Page 62: Table 13 Voip Advanced

    P-2002 Series User’s Guide The following table describes the labels in this screen. Table 13 VoIP Advanced LABEL DESCRIPTION Advanced VoIP This read-only field displays the number of the SIP account that you are Settings configuring. The changes that you save in this page affect the Prestige’s settings with the SIP account displayed here.
  • Page 63 SIP SUBSCRIBE message from the Prestige. The SIP server stops providing the message waiting service if it has not received another SIP SUBSCRIBE message from the Prestige before this time period expires. Chapter 6 VoIP Screens P-2002 Series User’s Guide...

  • Page 64: Quality Of Service (Qos)

    P-2002 Series User’s Guide Table 13 VoIP Advanced (continued) LABEL DESCRIPTION Fax Option Use this field to set how the Prestige handles fax messages. You can select either the Fax Pass-through or the T.38 fax methods. Select Fax Pass-through to have the Prestige send fax messages over G.711.

  • Page 65: Dscp And Per-Hop Behavior

    VLAN group. Some ISPs use the VLAN tag to identify voice traffic and give it priority over other traffic. 6.6 QoS Configuration Click VoIP in the navigation panel and then QoS to display the following screen. Chapter 6 VoIP Screens Unused (2-bit) P-2002 Series User’s Guide...

  • Page 66: Figure 27 Qos

    P-2002 Series User’s Guide Figure 27 QoS The following table describes the labels in this screen. Table 14 QoS LABEL DESCRIPTION SIP TOS Priority Type a priority for voice transmissions. The Prestige applies Type of Service priority tags with this priority to voice traffic that it transmits.

  • Page 67: Chapter 7 Phone

    Click PHONE in the navigation panel to display the following screen. Use this screen to configure phone port settings that are specific to an individual phone port. Chapter 7 Phone P-2002 Series User’s Guide H A P T E R Phone...

  • Page 68: Figure 28 Phone Port

    P-2002 Series User’s Guide Figure 28 Phone Port The following table describes the labels in this screen. Table 15 Phone Port LABEL Phone Port Settings Speaking Volume Listening Volume Outgoing Call use G.168 Active VAD Support Dialing Interval DESCRIPTION Use this field to select the phone port that you want to configure.

  • Page 69: Supplementary Phone Services Overview

    Service Mode. Commands for supplementary services are listed in the table below. Chapter 7 Phone DESCRIPTION Click Apply to save your changes back to the Prestige. Click Reset to begin configuring this screen afresh. Section 8.3 on page Section 11.3 on page P-2002 Series User’s Guide...

  • Page 70: European Call Hold

    P-2002 Series User’s Guide After pressing the flash key, if you do not issue the sub-command before the default sub- command timeout (2 seconds) expires or issue an invalid sub-command, the current operation will be aborted. Table 16 European Flash Key Commands...

  • Page 71: European Call Transfer

    7.3.3.1 USA Call Hold Call hold allows you to put a call (A) on hold by pressing the flash key. Chapter 7 Phone P-2002 Series User’s Guide DESCRIPTION Put a current call on hold to place a second call. After the second call is successful, press the flash key again to have a three-way conference call.

  • Page 72: Usa Call Waiting

    P-2002 Series User’s Guide If you have another call, press the flash key to switch back and forth between caller A and B by putting either one on hold. If you hang up the phone but a caller is still on hold, there will be a remind ring.

  • Page 73: Figure 29 Phone Common

    Prestige's phone ports, you may need to subscribe to the services from your voice service provider. Click Apply to save your changes back to the Prestige. Click Reset to begin configuring this screen afresh. P-2002 Series User’s Guide...
  • Page 74 P-2002 Series User’s Guide Chapter 7 Phone...

  • Page 75: Chapter 8 Phone Book

    8.2 Speed Dial Configuration Click PHONEBOOK in the navigation panel and then Speed Dial to display the following screen. Chapter 8 Phone Book P-2002 Series User’s Guide H A P T E R Phone Book...

  • Page 76: Figure 30 Speed Dial

    P-2002 Series User’s Guide Figure 30 Speed Dial The following table describes the labels in this screen. Table 19 Speed Dial LABEL DESCRIPTION Add New Entry Use this section of the screen to edit and save new or existing speed dial phone book entries.

  • Page 77: Call Forward

    Use this screen to configure the Prestige to block or redirect calls. You can configure a different call forwarding table for each SIP account or use the same call forwarding table for both. Chapter 8 Phone Book P-2002 Series User’s Guide...

  • Page 78: Figure 31 Call Forward

    P-2002 Series User’s Guide Figure 31 Call Forward The following table describes the labels in this screen. Chapter 8 Phone Book...

  • Page 79: Table 20 Call Forward

    Select Accept to have the Prestige allow calls from the number specified in the Incoming Call Number field. Apply Click Apply to save your changes back to the Prestige. Reset Click Reset to begin configuring this screen afresh. Chapter 8 Phone Book P-2002 Series User’s Guide...

  • Page 80: Lifeline Configuration (Prestige 2002L)

    P-2002 Series User’s Guide 8.4 Lifeline Configuration (Prestige 2002L) Click PHONEBOOK in the navigation panel and then Lifeline to display the following screen. Figure 32 Lifeline The following table describes the labels in this screen. Table 21 Lifeline LABEL DESCRIPTION PSTN Pre-fix Specify the prefix number for dialing regular calls.

  • Page 81: Chapter 9 Logs

    This field states the reason for the log. Source This field lists the source IP address and the port number of the incoming packet. Chapter 9 Logs H A P T E R Chapter 3 on page P-2002 Series User’s Guide Logs...

  • Page 82: Log Message Descriptions

    P-2002 Series User’s Guide Table 22 View Log (continued) LABEL DESCRIPTION Destination This field lists the destination IP address and the port number of the incoming packet. Note This field displays additional information about the log entry. 9.2 Log Message Descriptions The following tables provide descriptions of example log messages.

  • Page 83: Table 25 Sip Logs

    Error, Call fail: RTP connect fail Error, RTP connection cannot close Chapter 9 Logs P-2002 Series User’s Guide DESCRIPTION The device dropped an ICMP packet that was too large. The device is saving configuration changes. DESCRIPTION The listed SIP account was successfully registered with a SIP register server.

  • Page 84: Table 27 Fsm Logs: Caller Side

    P-2002 Series User’s Guide Table 27 FSM Logs: Caller Side LOG MESSAGE VoIP Call Start Ph[Phone Port Number] <- Outgoing Call Number VoIP Call Established Ph[Phone Port] -> Outgoing Call Number VoIP Call End Phone[Phone Port] Table 28 FSM Logs: Callee Side...

  • Page 85: Chapter 10 Maintenance

    Click MAINTENANCE in the navigation panel to open the Status screen, where you can use to monitor your Prestige. Note that these fields are READ-ONLY and are meant to be used for diagnostic purposes. Figure 34 System Status Chapter 10 Maintenance P-2002 Series User’s Guide H A P T E R Maintenance...

  • Page 86: F/W Upload Screen

    P-2002 Series User’s Guide The following table describes the labels in this screen. Table 30 System Status LABEL DESCRIPTION System Name This is the System Name you chose in the SYSTEM General screen. It is for identification purposes Model Name The model name identifies your device type.

  • Page 87: Figure 35 Firmware Upload

    Figure 36 Firmware Upload In Process The device automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop. Chapter 10 Maintenance P-2002 Series User’s Guide...

  • Page 88: Configuration Screen

    P-2002 Series User’s Guide Figure 37 Network Temporarily Disconnected After two minutes, log in again and check your new firmware version in the System Status screen. If the upload was not successful, the following screen will appear. Click Return to go back to the F/W Upload screen.

  • Page 89: Backup Configuration

    Type in the location of the file you want to upload in this field or click Browse... to find it. Browse... Click Browse... to find the file you want to upload. Remember that you must decompress compressed (.ZIP) files before you can upload them. Upload Click Upload to begin the upload process. Chapter 10 Maintenance P-2002 Series User’s Guide...

  • Page 90: Back To Factory Defaults

    P-2002 Series User’s Guide Note: Do not turn off the device while configuration file upload is in progress. After you see a “configuration upload successful” screen, you must then wait one minute before logging into the device again. Figure 40 Configuration Upload Successful The device automatically restarts in this time causing a temporary network disconnect.

  • Page 91: Restart Screen

    System restart allows you to reboot the Prestige without turning the power off. Click MAINTENANCE in the navigation panel and then Restart. Click Restart to have the Prestige reboot. This does not affect the Prestige's configuration. Figure 43 Restart Screen Chapter 10 Maintenance P-2002 Series User’s Guide Section 2.3 on page...
  • Page 92 P-2002 Series User’s Guide Chapter 10 Maintenance...

  • Page 93: Chapter 11 Phone Usage

    4 Listen to the IP address and make a note of it. 5 Hang up the receiver. Chapter 11 Phone Usage H A P T E R Phone Usage Section 8.2 on page 75) for peer-to-peer calls or SIP numbers that P-2002 Series User’s Guide...

  • Page 94: Auto Firmware Upgrade

    P-2002 Series User’s Guide 11.5 Auto Firmware Upgrade During auto-provisioning, the Prestige checks to see if there is a newer firmware version. If newer firmware is available, the Prestige plays a recording when you pick up your phone’s handset. Press “*99#” to upgrade the Prestige’s firmware.

  • Page 95: Chapter 12 Troubleshooting

    H A P T E R Troubleshooting CORRECTIVE ACTION Check your Ethernet cable connections and type (refer to the Quick Start Guide for details). Check for faulty Ethernet cables. Make sure your computer’s Ethernet card is working properly. P-2002 Series User’s Guide...

  • Page 96: Problems With The Lan Interface

    P-2002 Series User’s Guide 12.3 Problems with the LAN Interface Table 35 Troubleshooting the LAN Interface PROBLEM I cannot access the Prestige from the LAN. I cannot ping any computer on the LAN. The Prestige cannot get an IP address from the ISP.

  • Page 97: Problems With The Web Configurator

    (see all of the factory defaults including the password. Chapter 12 Troubleshooting Section 12.9 on page 99 to check that pop-up windows, JavaScripts and Section 2.3 on page P-2002 Series User’s Guide 31). This restores...

  • Page 98: Problems With Telephone Or Telephone Port

    P-2002 Series User’s Guide 12.7 Problems with Telephone or Telephone Port Table 39 Troubleshooting Telephone PROBLEM CORRECTIVE ACTION There is no dial Check the telephone connections and telephone wire. tone or I can’t make Beeping means that there is not a SIP account registered for the phone to use.

  • Page 99: Pop-Up Windows, Javascripts And Java Permissions

    1 In Internet Explorer, select Tools, Internet Options, Privacy. 2 Clear the Block pop-ups check box in the Pop-up Blocker section of the screen. This disables any web pop-up blockers you may have enabled. Chapter 12 Troubleshooting P-2002 Series User’s Guide...

  • Page 100: Enable Pop-Up Blockers With Exceptions

    P-2002 Series User’s Guide Figure 45 Internet Options 3 Click Apply to save this setting. 12.9.1.2 Enable Pop-up Blockers with Exceptions Alternatively, if you only want to allow pop-up windows from your device, see the following steps. 1 In Internet Explorer, select Tools, Internet Options and then the Privacy tab.

  • Page 101: Figure 46 Internet Options

    P-2002 Series User’s Guide Figure 46 Internet Options 3 Type the IP address of your device (the web page that you do not want to have blocked) with the prefix “http://”. For example, http://192.168.1.1. 4 Click Add to move the IP address to the list of Allowed sites.

  • Page 102: Javascripts

    P-2002 Series User’s Guide Figure 47 Pop-up Blocker Settings 5 Click Close to return to the Privacy screen. 6 Click Apply to save this setting. 12.9.2 JavaScripts If pages of the web configurator do not display properly in Internet Explorer, check that JavaScripts are allowed.

  • Page 103: Figure 48 Internet Options

    P-2002 Series User’s Guide Figure 48 Internet Options 2 Click the Custom Level... button. 3 Scroll down to Scripting. 4 Under Active scripting make sure that Enable is selected (the default). 5 Under Scripting of Java applets make sure that Enable is selected (the default).

  • Page 104: Java Permissions

    P-2002 Series User’s Guide Figure 49 Security Settings - Java Scripting 12.9.3 Java Permissions 1 From Internet Explorer, click Tools, Internet Options and then the Security tab. 2 Click the Custom Level... button. 3 Scroll down to Microsoft VM. 4 Under Java permissions make sure that a safety level is selected.

  • Page 105: Java (Sun)

    1 From Internet Explorer, click Tools, Internet Options and then the Advanced tab. 2 make sure that Use Java 2 for <applet> under Java (Sun) is selected. 3 Click OK to close the window. Chapter 12 Troubleshooting P-2002 Series User’s Guide...

  • Page 106: Figure 51 Java (Sun)

    P-2002 Series User’s Guide Figure 51 Java (Sun) Chapter 12 Troubleshooting...

  • Page 107: Product Specifications

    PPPoE client DHCP client Friendly web-based configuration tool Telnet management FTP/TFTP firmware upgrade and configuration backup/restore IVR for IP address and FW upgrade Secure TFTP and HTTP auto-provisioning (3DES default encryption) Supports NAT Traversal (RFC 3489) P-2002 Series User’s Guide...

  • Page 108: Table 42 Feature Specifications

    P-2002 Series User’s Guide Table 42 Feature Specifications Voice Functions Call Features Custom Tones (IVR) SIP (RFC 3261) version 2 SDP (RFC 2327) RTP (RFC 1889) RTCP (RFC 1890) G.168 Echo Cancellation VAD (Voice Activity Detection) Silence Suppression CNG (Comfort Noise Generation)

  • Page 109: Table 43 Power Adaptor Specifications

    • On: when voice port is off hook • Off: when voice port is connected • Blinking: telephone ringing Internal SPTGEN DNS Proxy UNIX syslog DV-1215A AC120Volts/60Hz/30W AC12Volts/1.25A 14 W UL, CUL, CSA (UL 1310, CSA C22.2 No.223) P-2002 Series User’s Guide...
  • Page 110 P-2002 Series User’s Guide Table 43 Power Adaptor Specifications (continued) NORTH AMERICAN PLUG STANDARDS AC Power Adapter Model Input Power Output Power Power Consumption Safety Standards EUROPEAN PLUG STANDARDS AC Power Adapter Model Input Power Output Power Power Consumption Safety Standards...

  • Page 111: Setting Up Your Computer's Ip Address

    IP addresses that place them in the same subnet as the Prestige’s LAN port. Windows 95/98/Me Click Start, Settings, Control Panel and double-click the Network icon to open the Network window. Appendix B P-2002 Series User’s Guide P P E N D I X...

  • Page 112: Figure 52 Windows 95/98/Me: Network: Configuration

    P-2002 Series User’s Guide Figure 52 WIndows 95/98/Me: Network: Configuration Installing Components The Network window Configuration tab displays a list of installed components. You need a network adapter, the TCP/IP protocol and Client for Microsoft Networks. If you need the adapter: 1 In the Network window, click Add.

  • Page 113: Figure 53 Windows 95/98/Me: Tcp/Ip Properties: Ip Address

    If you do not know your DNS information, select Disable DNS. If you know your DNS information, select Enable DNS and type the information in the fields below (you may not need to fill them all in). P-2002 Series User’s Guide...

  • Page 114: Figure 54 Windows 95/98/Me: Tcp/Ip Properties: Dns Configuration

    P-2002 Series User’s Guide Figure 54 Windows 95/98/Me: TCP/IP Properties: DNS Configuration 4 Click the Gateway tab. • • 5 Click OK to save and close the TCP/IP Properties window. 6 Click OK to close the Network window. Insert the Windows CD if prompted.

  • Page 115: Figure 55 Windows Xp: Start Menu

    Figure 55 Windows XP: Start Menu 2 In the Control Panel, double-click Network Connections (Network and Dial-up Connections in Windows 2000/NT). Figure 56 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Properties. Appendix B P-2002 Series User’s Guide...

  • Page 116: Figure 57 Windows Xp: Control Panel: Network Connections: Properties

    P-2002 Series User’s Guide Figure 57 Windows XP: Control Panel: Network Connections: Properties 4 Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and then click Properties. Figure 58 Windows XP: Local Area Connection Properties 5 The Internet Protocol TCP/IP Properties window opens (the General tab in Windows XP).

  • Page 117: Figure 59 Windows Xp: Internet Protocol (Tcp/Ip) Properties

    Gateway. To manually configure a default metric (the number of transmission hops), clear the Automatic metric check box and type a metric in Metric. Click Add. Repeat the previous three steps for each default gateway you want to add. Click OK when finished. P-2002 Series User’s Guide...

  • Page 118: Figure 60 Windows Xp: Advanced Tcp/Ip Properties

    P-2002 Series User’s Guide Figure 60 Windows XP: Advanced TCP/IP Properties 7 In the Internet Protocol TCP/IP Properties window (the General tab in Windows XP): • • Click Obtain DNS server address automatically if you do not know your DNS server IP address(es).

  • Page 119: Figure 61 Windows Xp: Internet Protocol (Tcp/Ip) Properties

    Network Connections, right-click a network connection, click Status and then click the Support tab. Macintosh OS 8/9 1 Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel. Appendix B P-2002 Series User’s Guide...

  • Page 120: Figure 62 Macintosh Os 8/9: Apple Menu

    P-2002 Series User’s Guide Figure 62 Macintosh OS 8/9: Apple Menu 2 Select Ethernet built-in from the Connect via list. Figure 63 Macintosh OS 8/9: TCP/IP 3 For dynamically assigned settings, select Using DHCP Server from the Configure: list. Appendix B...

  • Page 121: Figure 64 Macintosh Os X: Apple Menu

    Type your subnet mask in the Subnet mask box. Type the IP address of your Prestige in the Router address box. Select Automatic from the Location list. Select Built-in Ethernet from the Show list. Click the TCP/IP tab. P-2002 Series User’s Guide...

  • Page 122: Figure 65 Macintosh Os X: Network

    P-2002 Series User’s Guide Figure 65 Macintosh OS X: Network 4 For statically assigned settings, do the following: • • • • 5 Click Apply Now and close the window. 6 Turn on your Prestige and restart your computer (if prompted).

  • Page 123: Table 44 Classes Of Ip Addresses

    Network number Network number Network number Network number –2 or 254 hosts. –2 or 65534 hosts. –2 hosts (approximately 16 million hosts). P-2002 Series User’s Guide IP Subnetting OCTET 3 OCTET 4 Host ID Host ID Host ID Host ID...

  • Page 124: Appendix Cip Subnetting

    P-2002 Series User’s Guide Since the first octet of a class “A” IP address must contain a “0”, the first octet of a class “A” address can have a value of 0 to 127. Similarly the first octet of a class “B” must begin with “10”, therefore the first octet of a class “B”...

  • Page 125: Table 47 Alternative Subnet Mask Notation

    192.168.1.0 with mask 255.255.255.128 and 192.168.1.128 with mask 255.255.255.128. Appendix C SUBNET MASK “1” BITS NETWORK NUMBER 192.168.1. 11000000.10101000.00000001. 255.255.255. 11111111.11111111.11111111. P-2002 Series User’s Guide LAST OCTET BIT VALUE 0000 0000 1000 0000 1100 0000 1110 0000 1111 0000 1111 1000 1111 1100...

  • Page 126: Table 49 Subnet 1

    P-2002 Series User’s Guide Note: In the following charts, shaded/bolded last octet bit values indicate host ID bits “borrowed” to form network ID bits. The number of “borrowed” host ID bits determines the number of subnets you can have. The remaining number of host ID bits (after “borrowing”) determines the number of hosts you can have...

  • Page 127: Table 51 Subnet 1

    11111111.11111111.11111111. Lowest Host ID: 192.168.1.65 Highest Host ID: 192.168.1.126 NETWORK NUMBER 192.168.1. 11000000.10101000.00000001. 11111111.11111111.11111111. Lowest Host ID: 192.168.1.129 Highest Host ID: 192.168.1.190 P-2002 Series User’s Guide LAST OCTET BIT VALUE 00000000 11000000 LAST OCTET BIT VALUE 01000000 11000000 LAST OCTET BIT...

  • Page 128: Table 54 Subnet 4

    P-2002 Series User’s Guide Table 54 Subnet 4 IP/SUBNET MASK IP Address IP Address (Binary) Subnet Mask (Binary) Subnet Address: 192.168.1.192 Broadcast Address: 192.168.1.255 Example Eight Subnets Similarly use a 27-bit mask to create 8 subnets (001, 010, 011, 100, 101, 110).

  • Page 129: Table 57 Class B Subnet Planning

    255.255.252.0 (/22) 255.255.254.0 (/23) 255.255.255.0 (/24) 255.255.255.128 (/25) 255.255.255.192 (/26) 1024 255.255.255.224 (/27) 2048 255.255.255.240 (/28) 4096 255.255.255.248 (/29) 8192 255.255.255.252 (/30) 16384 255.255.255.254 (/31) 32768 P-2002 Series User’s Guide NO. HOSTS PER SUBNET 32766 16382 8190 4094 2046 1022...
  • Page 130 P-2002 Series User’s Guide Appendix C...

  • Page 131: Pppoe

    Traditional Dial-up Scenario The following diagram depicts a typical hardware configuration where the computers use traditional dial-up networking. Appendix D P-2002 Series User’s Guide P P E N D I X Figure 66 on page 132). One PVC can PPPoE...

  • Page 132: Figure 66 Single-Computer Per Router Hardware Configuration

    P-2002 Series User’s Guide Figure 66 Single-Computer per Router Hardware Configuration How PPPoE Works The PPPoE driver makes the Ethernet appear as a serial link to the computer and the computer runs PPP over it, while the modem bridges the Ethernet frames to the Access Concentrator (AC).

  • Page 133: Appendix E Internal Sptgen

    Appendix E P P E N D I X Internal SPTGEN parameter values allowed <0(No)| 1(Yes)> <Str> <Str> <Str> <0(No)| 1(Yes)> <0(No)| 1(Yes)> <0(No)| 1(Yes)> 133), then you disable every field in this menu. P-2002 Series User’s Guide >. = Prestige...

  • Page 134: Figure 69 Invalid Parameter Entered: Command Line Example

    P-2002 Series User’s Guide If you enter a parameter that is invalid in the Input column, the Prestige will not save the configuration and the command line will display the Field Identification Number. on page 134, shown next, is an example of what the Prestige displays if you enter a value other than “0”...

  • Page 135: Figure 71 Internal Sptgen Ftp Download Example

    ” file when you save it to your computer but it must rom-t ” when you upload it to your Prestige. ” sets the transfer mode to binary. ” file from your computer to the Prestige using the “ P-2002 Series User’s Guide ” command.

  • Page 136: Table 58 Abbreviations Used In The Example Internal Sptgen Screens Table

    P-2002 Series User’s Guide Table 58 Abbreviations Used in the Example Internal SPTGEN Screens Table ABBREVIATION MEANING Field Identification Number (not seen in SMT screens) Field Name Parameter Values Allowed INPUT An example of what you may enter Applies to the Prestige.
  • Page 137 RIP Version 40000033= Nailed-up Connection 40000034= LAN IP Address 40000035= LAN IP subnet mask Bits 40000036= LAN Gateway Appendix E P-2002 Series User’s Guide <0(No) | 1(Yes)> = ChangeMe <2(PPPOE) | 3(RFC 1483)| 4(PPPoA )| 5(ENET ENCAP)> <Str> = any <Str>...
  • Page 138 P-2002 Series User’s Guide Table 61 Menu 12 / Menu 12.1.1 IP Static Route Setup 120101001 = IP Static Route set #1, Name 120101002 = IP Static Route set #1, Active 120101003 = IP Static Route set #1, Destination IP address...
  • Page 139 IP Static Route set #7, Metric 120107007 = IP Static Route set #7, Private / Menu 12.1.8 IP Static Route Setup 120108001 = IP Static Route set #8, Name Appendix E P-2002 Series User’s Guide = 0.0.0.0 <0(No) |1(Yes)> INPUT <Str> <0(No) |1(Yes)> = 0.0.0.0 = 0.0.0.0...

  • Page 140: Table 61 Menu 12

    P-2002 Series User’s Guide Table 61 Menu 12 (continued) 120108002 = IP Static Route set #8, Active 120108003 = IP Static Route set #8, Destination IP address 120108004 = IP Static Route set #8, Destination IP subnetmask 120108005 = IP Static Route set #8, Gateway...
  • Page 141 SUA Server #12 Protocol 150000054 = SUA Server #12 Port Start 150000055 = SUA Server #12 Port End 150000056 = SUA Server #12 Local IP address Appendix E P-2002 Series User’s Guide <0(All)|6(TCP)|17(U DP)> = 0.0.0.0 <0(No) | 1(Yes)> <0(All)|6(TCP)|17(U = 0.0.0.0 DP)>...

  • Page 142: Table 63 Menu 21.1 Filter Set #1

    P-2002 Series User’s Guide Table 63 Menu 21.1 Filter Set #1 / Menu 21 Filter set #1 210100001 = Filter Set 1, Name / Menu 21.1.1.1 set #1, rule #1 210101001 = IP Filter Set 1,Rule 1 Type 210101002 =...
  • Page 143 210104003 = IP Filter Set 1,Rule 4 Protocol 210104004 = IP Filter Set 1,Rule 4 Dest IP address 210104005 = IP Filter Set 1,Rule 4 Dest Subnet Mask Appendix E P-2002 Series User’s Guide <0(none)|1(equal) |2(not equal)|3(less)|4( greater)> <1(check next)|2(forward)| 3(drop)>...
  • Page 144 P-2002 Series User’s Guide Table 63 Menu 21.1 Filter Set #1 (continued) 210104006 = IP Filter Set 1,Rule 4 Dest Port 210104007 = IP Filter Set 1,Rule 4 Dest Port Comp 210104008 = IP Filter Set 1,Rule 4 Src IP address...

  • Page 145: Table 64 Menu 21.1 Filer Set #2

    IP Filter Set 2, Rule 1 Dest IP address 210201005 = IP Filter Set 2, Rule 1 Dest Subnet Mask 210201006 = IP Filter Set 2, Rule 1 Dest Port Appendix E P-2002 Series User’s Guide <2(TCP/IP)> <0(No)|1(Yes)> = 17 = 0.0.0.0 = 139 <0(none)|1(equal) |2(not equal)|3(less)|4( greater)>...
  • Page 146 P-2002 Series User’s Guide Table 64 Menu 21.1 Filer Set #2 (continued) 210201007 = IP Filter Set 2, Rule 1 Dest Port Comp 210201008 = IP Filter Set 2, Rule 1 Src IP address 210201009 = IP Filter Set 2, Rule 1 Src Subnet...
  • Page 147 IP Filter Set 2, Rule 4 Dest IP address 210204005 = IP Filter Set 2, Rule 4 Dest Subnet Mask 210204006 = IP Filter Set 2, Rule 4 Dest Port Appendix E P-2002 Series User’s Guide <1(check next)|2(forward)|3( drop)> INPUT <0(none)|2(TCP/IP)> = 2 <0(No)|1(Yes)> = 0.0.0.0 = 139 <0(none)|1(equal)|2...
  • Page 148 P-2002 Series User’s Guide Table 64 Menu 21.1 Filer Set #2 (continued) 210204007 = IP Filter Set 2, Rule 4 Dest Port Comp 210204008 = IP Filter Set 2, Rule 4 Src IP address 210204009 = IP Filter Set 2, Rule 4 Src Subnet...

  • Page 149: Table 65 Menu 23 System Menus

    241100008 = WEB Server Access 241100009 = WEB Server Secured IP address Table 65 Menu 23 System Menus */ Menu 23.1 System Password Setup Appendix E P-2002 Series User’s Guide <1(check next)|2(forward)|3( drop)> INPUT <0(none)|2(TCP/IP)> = 2 <0(No)|1(Yes)> = 17 = 0.0.0.0...

  • Page 150: Table 66 Menu 24.10 Time And Date Setting

    P-2002 Series User’s Guide Table 65 Menu 23 System Menus (continued) 230000000 = System Password Table 66 Menu 24.10 Time and Date Setting Time and Date Setting / Menu 24.10 241000001 = Time Protocol 241000002 = Time Server Address 241000003 =...

  • Page 151: Table 68 Menu 98 Voip And Auto Upgrade Menus

    SIP #1 Mapping to POTS Phone1 980101019 = SIP #1 Mapping to POTS Phone2 980101020 = SIP #1 CODEC Type 1 980101021 = SIP #1 CODEC Type 2 Appendix E P-2002 Series User’s Guide <0(all)|1(none)|2(L an)|3(Wan)> = 0.0.0.0 INPUT <0(No) | 1(Yes)> sipserver.ne <1024~65535>...
  • Page 152 P-2002 Series User’s Guide Table 68 Menu 98 VoIP and Auto Upgrade Menus (continued) 980101022 = SIP #1 DTMF Key Type 980101023 = SIP #1 Transport Type 980101024 = SIP #1 Hide Caller ID 980101025 = SIP #1 Auto Redial...
  • Page 153 Phone #1 Outgoing Call use SIP #1 980301004 = Phone #1 Outgoing Call use SIP #2 980301005 = Phone #1 G.168 Echo Cancellation Appendix E P-2002 Series User’s Guide sipserver.ne <0(No) | 1(Yes)> <0(No) | 1(Yes)> <0(G711mu) = 18 |8(G711A) |18(G729)>...
  • Page 154 P-2002 Series User’s Guide Table 68 Menu 98 VoIP and Auto Upgrade Menus (continued) 980301006 = Phone #1 Voice Active Detection Support 980301007 = Phone #1 Dialing Short Interval 980301008 = Phone #1 Dialing Long Interval 980301009 = Phone #1 Flash Max Interval...
  • Page 155 Phone Book #4 Speed Number / Menu 98.7.5 Phone Book (Speed Dial) #5 Setup 980705001 = Phone Book #5 Active 980705002 = Phone Book #5 SIP Number Appendix E P-2002 Series User’s Guide INPUT <0(No) |1(Yes)> <0(Proxy) |1(Non- Proxy)> INPUT <0(No) |1(Yes)>...
  • Page 156 P-2002 Series User’s Guide Table 68 Menu 98 VoIP and Auto Upgrade Menus (continued) 980705003 = Phone Book #5 SIP IP/URL 980705004 = Phone Book #5 Name 980705005 = Phone Book #5 Type 980705006 = Phone Book #5 Speed Number / Menu 98.7.6 Phone Book (Speed Dial) #6 Setup...
  • Page 157 Call Forward #1 Table[1] flag 981101008 = Call Forward #1 Table[2] caller 981101009 = Call Forward #1 Table[2] dest 981101010 = Call Forward #1 Table[2] flag Appendix E P-2002 Series User’s Guide INPUT <0(No) |1(Yes)> <0(Proxy) |1(Non- Proxy)> INPUT <0(No) |1(Yes)> <0(No) |1(Force SIP if PSTN unplugged)>...
  • Page 158 P-2002 Series User’s Guide Table 68 Menu 98 VoIP and Auto Upgrade Menus (continued) 981101011 = Call Forward #1 Table[3] caller 981101012 = Call Forward #1 Table[3] dest 981101013 = Call Forward #1 Table[3] flag 981101014 = Call Forward #1 Table[4] caller...
  • Page 159 981102030 = Call Forward #2 Table[9] dest 981102031 = Call Forward #2 Table[9] flag 981102032 = Call Forward #2 Table[10] caller 981102033 = Call Forward #2 Table[10] dest 981102034 = Call Forward #2 Table[10] flag Appendix E P-2002 Series User’s Guide...
  • Page 160 P-2002 Series User’s Guide Appendix E...

  • Page 161: Index

    Codec 54, 62 Codecs Coder/Decoder 54, 62 Comfort Noise Generation Communications Compliance, FCC Components Compression Computer Name Condition 7, 79 Configuration Screen Configuration Upload Successful Connecting Cables Consequential Damages P-2002 Series User’s Guide Index 69, 71, 73 25, 67, 108...
  • Page 162 P-2002 Series User’s Guide Contact Information Contacting Customer Support Copyright Correcting Interference Corrosive Liquids Covers Customer Support Damage Dampness Danger Date Daylight Savings Dealer Deep Default Management IP Address Default Management Subnet Mask Default Password 30, 107 Defective Denmark, Contact Information...
  • Page 163 IEEE 802.1Q VLAN IETF Immediate Dial 73, 79 Incoming Call Apply to Incoming Call Number Incoming Lifeline Call Mapping Indirect Damages Index P-2002 Series User’s Guide Insurance Interference Interference Correction Measures Interference Statement Internal Calls Internal IP Addresses Internal SPTGEN 109, 133...
  • Page 164 P-2002 Series User’s Guide Lifeline 23, 24, 75, 108 Lifeline Logs Lifeline Screen Lightning LINE Port Line Ports Liquids, Corrosive Listening Port 58, 63 Listening Volume Log Message Descriptions Logs Loop Start Signaling Maintenance Management Management IP Address Management IP Address, Default...
  • Page 165 Reorient Repair 6, 7 Replace Replacement Reproduction RESET Button Reset button Reset Warning Message Restart Screen Restore Restore Configuration Restricted Cone NAT Return Material Authorization (RMA) Number Returned Products Returns RFC 1305 P-2002 Series User’s Guide 25, 64 48, 62...
  • Page 166 P-2002 Series User’s Guide RFC 1889 48, 108 RFC 1890 RFC 2327 RFC 2516 RFC 3261 RFC 3489 RFC 3842 RFC 867 RFC 868 RFC3489 Rights Rights, Legal Ringer Equivalence Number Ringing Voltage Risk Risks RJ-45 RTCP (RFC 1890) RTP (RFC 1889)
  • Page 167 Use NAT Use NAT Address SIP and RTP Use PPPoE Client Use Proxy Used Port Using Speed Dial Index P-2002 Series User’s Guide 24, 67, 68, 108 Value Vendor Ventilation Slots View Log Screen Viewing Certifications Virtual Local Area Network...
  • Page 168 P-2002 Series User’s Guide ZyNOS ZyNOS Firmware Version ZyXEL Communications Corporation ZyXEL Home Page ZyXEL Limited Warranty Note ZyXEL Network Operating System Index...

This manual is also suitable for:

P-2002lZyxel prestige 2002

Table of Contents