ZyXEL Communications Prestige 2002 Series Quick Start Manual
Voip analog telephone adaptor
Hide thumbs
Also See for Prestige 2002 Series:
- User manual (102 pages) ,
- Quick start manual (21 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for ZyXEL Communications Prestige 2002 Series
Summary of Contents for ZyXEL Communications Prestige 2002 Series
-
Page 1: Quick Start Guide
Prestige 2002 Series VoIP Analog Telephone Adaptor Quick Start Guide Version 3.60 5/2005... -
Page 2: Hardware Connections
See your User’s Guide for more information on all features. Note: You should have Internet access and a SIP-based VoIP account already set up. 1 Hardware Connections You need the following: Prestige Prestige 2002 Series 4 Making Phone Calls 5 Troubleshooting Computer Telephone... - Page 3 Prestige 2002 Series Telephone Cable Ethernet Cable Power Adaptor (varies by region)
- Page 4 1 Computer Connection Connect your computer to the PC port with an Ethernet cable. 2 LAN Connection Connect a cable/DSL modem, router or switch to the LAN port with an Ethernet cable. Prestige 2002 Series...
- Page 5 To allow your computer to communicate with the Prestige, assign your computer a static IP address in the 192.168.5.2 to 192.168.5.254 range with a subnet mask of 255.255.255.0. These instructions are for the Windows 2000, Windows NT and Windows XP operating systems. Prestige 2002 Series...
-
Page 6: Initial Configuration
Prestige 2002L for making regular calls. 1 Launch your web browser. Enter “192.168.5.1” (the Prestige’s default management IP address) as the web site address. Prestige 2002 Series to make calls through the Internet. Use this section if the PWR/VoIP LED... - Page 7 Internet access settings. If you were not given Internet access settings, skip Section 3.2. Prestige 2002 Series 3 Type a new password (and retype it to confirm) and click Apply. Otherwise click Ignore.
- Page 8 Prestige 2002 Series 3.1 Internet Access via Ethernet If you were given an IP address to use, select Use Fixed IP Address and enter the information provided. If you were given a user name and password for Internet access, select Use PPPoE client.
- Page 9 Select whether you want to receive calls for this SIP account on Phone 1, Phone 2 or both. Click Apply. Click Settings to open the VoIP Advanced screen as shown next. Prestige 2002 Series...
- Page 10 IP address and SIP port number. You must also configure the NAT router to forward traffic with this port num- ber to the Prestige. Click Apply. Note: The PWR/VoIP LED turns orange after the Prestige registers your SIP account. Prestige 2002 Series...
-
Page 11: Speed Dial Configuration
SIP server or go to the other party’s VoIP phone without using a SIP server (peer-to-peer). Enter the IP address or domain name of the SIP server or the party you will call. Click Add. Prestige 2002 Series... -
Page 12: Making Phone Calls
PHONE BOOK Lifeline screen (see section 6.2). When the PWR/VoIP LED is green or off, make regular calls without dialing a prefix number. Prestige 2002 Series 3.3) for peer-to-peer calls or SIP numbers that use letters. Dial the speed... -
Page 13: Troubleshooting
Prestige 2002’s IP address (see above). address for access. Cannot access the Verify your settings in the ETHERNET screen. Make sure you entered the correct user Internet. name and password if you are using PPPoE. Prestige 2002 Series Section Section... - Page 14 Viewing Your Product’s Certifications 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page. Prestige 2002 Series...