Profiles - ZyXEL Communications ZyXEL Prestige 2000W User Manual

Prestige 2000W_V2 User's Guide
Note: Only set the authentication type to shared key if the wireless clients are
required to send the WEP key to the AP for authentication (not just for
encryption). Many networks use an open system where you would only
WEP for encryption, not for authentication.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
2 Use the up or down arrow and the Left key to select Auth
Type.
3 Select Shared Key if the wireless clients need to send the WEP
key to the AP for authentication.
Select Open System if the wireless clients do not need to send
the WEP key to the AP for authentication.
4 The Prestige restarts when you return to the main screen.

3.8 Profiles

Use a profile to save your wireless settings for future use.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
2 Use the up or down arrow and the Left key to select Profiles.
36
7. Wireless
8. Restart
1. Information
Select
8. Auth Type
1. Site Survey
2. SSID
Select
[2] Shared Key
[1] Open System
Select
7. Wireless
8. Restart
1. Information
Select
7. Profiles
8. Auth Type
1. Site Survey
Select
Chapter 3 Wireless LAN Setup Menus
use
Back
Back
Back
Back
Back