Authentication Type - ZyXEL Communications ZyXEL Prestige 2000W User Manual

4 Select a WEP key to configure.
5 Select a keypad mode and use the keypad to enter the WEP key
that the AP is using. Use the Power/End key to clear the default
text and remove typos.
Press the OK key when you are done.
6 You can configure up to four WEP keys (in the same manner as
the first) but only one key can be selected (enabled) at any one
time.
7 Select Key Select.
8 Select the key that the AP is using.

3.7 Authentication Type

Some APs require the wireless clients to send the WEP key to the AP for authentication.
Chapter 3 Wireless LAN Setup Menus
Prestige 2000W_V2 User's Guide
7. WEP key 1
8. WEP key 2
9. WEP key 3
Select
WEP key 1
**********
Ok Aa1@
8. WEP key 2
9. WEP key 3
10. WEP key 4
Select
11. Key Select
12. Profiles
13. Auth Type
Select
Key 1
Key 2
Key 3
Select
Back
Clear
Back
Back
Back
35