Using Embedded Packet Trace - ZyXEL Communications P-2302R-P1 Support Notes

Network Address Translation= SUA Only
Key settings:

Service Type.......Currently, there are two authentication types that Road Runner supports,
RR-TAS and

Server IP.............The ZyXEL Device will find the Road Runner server IP if this field is blank,
otherwise enter the authentication server IP address if you know it.

My Login Name...Enter the login name given to you by your ISP

My Password.......Enter the password associated with the login name

WAN IP Address
otherwise, select Static.

IP Address & Subnet Mask & Gateway IP
IP when Static Assignment is selected above.

Using Embedded Packet Trace

Embedded Packet Trace
The ZyXEL Device packet trace records and analyzes packets running on LAN and WAN interfaces. It is
designed for users with technical backgrounds who are interested in the details of the packet flow on LAN or
WAN end of the ZyXEL Device. It is also very helpful for diagnostics if you have compatibility problems with
your ISP or if you want to know the details of a packet for configuring a filter rule.
The format of the display is as following:
Packet:
0 11880.160 ENET0-R[0062] TCP 192.168.1.2:1108->192.31.7.130:80
[index] [timer/second][channel-receive/transmit][length] [protocol] [sourceIP/port] [destIP/port]
There are two ways to dump the trace:
IP Subnet Mask= N/A
Gateway IP Address= N/A
RR-Manager. Choose the correct one for your local ISP.
Assignment...If the ISP did not assign you an explicit IP, select Dynamic,
All contents Copyright  2007 ZyXEL Communications Corporation.
P2302R-P1 Support Notes
Address...Enter the IP address, subnet mask & gateway
120