ZyXEL Communications P-2302R-P1 Support Notes page 118

Key settings:

Assigned By=,

IP Address=,
installation.
2. Your ISP checks the 'Host Name'
Some ISPs take advantage of the 'host name' message in a DHCP packet such as @home to do the
authentication. When first installing, the ISP's tech people configure the host name as the 'Computer
Name' of the PC in the 'Networking' settings. When the ZyXEL Device is attached to the cable modem to
connect to the ISP, we should configure this host name in the ZyXEL Device's system (menu 1).
System Name= zyxel
Domain Name=
First System DNS Server= From ISP
Second System DNS Server= From ISP
Menu 2 - WAN Setup
MAC Address:
Assigned By= IP address attached on LAN
IP Address= 192.168.1.33
Choose 'IP address attached on LAN'.
Enter the IP address of the PC which is installed by the ISP at the first
Menu 1 - General Setup
IP Address= N/A
IP Address= N/A
All contents Copyright  2007 ZyXEL Communications Corporation.
P2302R-P1 Support Notes
118