Step 1: Power Up; Step 2: Mounting Basics; Step 3: Set Time, Date, Etc - La Crosse Technology WW85777v2 Instructional Manual

Insert batteries (in any order):
• 2-AA batteries into thermo-hygro sensor
• 5 volt power cord (required) into WW85777v2 station
*3-AAA batteries for optional backup of your time and date
At this time, all of your sensor information should be displayed on your station.
Here are a few quick tips for mounting your sensor:
• Keep out of direct sunlight & ensure the sensor is well-ventilated.
• We recommend mounting under a deck or eave facing north.
• Insert the mounting screw through the front of the sensor and into the wall.
• Tighten the screw to snug (do not over tighten).
• Be sure the outdoor sensor is mounted vertically to drain moisture.
• The maximum wireless transmission range is over 330 feet (100 meters) in open air, not including walls or
floors.
You can manually adjust your station's settings:
1. Hold the SET button for 3 seconds to enter settings menu.
2. Press and release the + or - buttons to adjust the flashing values. Hold to adjust quickly.
3. Press and release the SET button to confirm and move to the next item.
Note: Press and release the LIGHT button any time to exit settings
Wireless Weather Forecast Station with Colored LCD Display

STEP 1: Power Up

AAA
AAA
AAA
ST E P 2 : Mo un t ing Ba sic s

STEP 3: Set Time, Date, etc.

AC 5.0V
Page | 3