Comp Eq Module - Zoom RhythmTrak RT-223 Operation Manual

COMP EQ Module

XOVER XOVER
L
EFFECT
MLT CMP
Divides the signal into three frequency bands and separately sets compressor and mix for each.
ON/OFF
Also includes 3-band equalizer.
EFFECT CHARA COLOR DIST
LO-FI
ON/OFF
Simulates low-fi sound. Also includes 3-band equalizer.
EFFECT DEPTH FREQ
RESONNC
ON/OFF
Resonance filter with LFO. Also includes 3-band equalizer.
Parameter description
Parameter name Setting range
EFFECT ON/OFF
ON, OFF
TYPE MLT CMP, LO-FI, RESONNC
XOVER L
50 - 16000
XOVER H 50 - 16000
SENS H
0 - 24
SENS M 0 - 24
SENS L
0 - 24
MIX H
0FF, -24 - 6
MIX M 0FF, -24 - 6
MIX L
0FF, -24 - 6
CHARA 0 - 10
COLOR
1 - 10
DIST 0 - 10
TONE
0 - 10
DEPTH 0 - 10
FREQ 1 - 30
RATE
1 - 30, t0 - t9, M1 - M4
TYPE
HPF, LPF, bPF
RESO 1 - 30
EFX LVL
0 - 30
DRY LVL 0 - 30
EQ H
-12 - 12
EQ M
-12 - 12
EQ L -12 - 12
BASS ON/OFF
ON, OFF
LEVEL 1 - 30
[Table 1 Synchronization setting for RATE and TIME parameter ]
Setting value Frequency
t0 Thirty-second note
t1 Sixteenth note
t2 Quarter note triplet
t3 Dotted sixteenth note
t4 Eighth note
ZOOM RT-223
Parameters
SENS SENS SENS
H H M L
EFX
TONE
LVL
RATE TYPE RESO
Controls effect ON/OFF for each patch.
Selects from three available types.
Sets the division point for low/mid frequency bands.
Sets the division point for mid/high frequency bands.
Sets the compressor sensitivity in the high range.
Sets the compressor sensitivity in the mid range.
Sets the compressor sensitivity in the low range.
Sets the high range mix amount.
Sets the mid range mix amount.
Sets the low range mix amount.
Sets the filter characteristic.
Adjusts the sound color.
Adjusts the distortion.
Adjusts the tonal quality.
Sets the effect depth.
Sets the LFO offset.
Sets the effect rate. When set to "tx" or "Mx", rate is synchronized to
rhythm tempo (see Table 2).
Selects the filter type.
Applies resonance to the effect.
Sets the effect sound mix amount.
Sets the original sound mix amount.
Applies boost/cut to the high range.
Applies boost/cut to the mid range.
Applies boost/cut to the low range.
Switches bass effect processing ON/OFF.
Sets the patch output level.
Setting value
t5
t6
t7
t8
t9
MIX MIX MIX EQ
H M L H
DRY
EQ H EQ M EQ L
LVL
EFX DRY
EQ H EQ M
LVL LVL
Parameter description
Frequency Setting value
Half note triplet M1
Dotted eighth note M2
Quarter note M3
Dotted quarter note M4
Half note
RT-223 Appendix
EQ EQ BASS
LEVEL
M L ON/OFF
BASS
LEVEL
ON/OFF
BASS
EQ L LEVEL
ON/OFF
Frequency
Full note
Full note x 2
Full note x 3
Full note x 4
75