Real-Time Recording Of A Bass Track - Zoom RhythmTrak RT-223 Operation Manual

NOTE
• If a MIDI clock signal is being received,
real-time recording is not possible. For
details, please refer to page 67.
Real-time recording of a
bass track
Next, let's add a bass track to the drum track
pattern recorded in the previous section.
1.
Press the [BASS] key.
The bass track is selected for recording.
2.
Press the [KIT/PROG] key, and then
use the VALUE [+]/[-] keys to select
the bass program.
3.
Press the [EXIT] key to return to
pattern mode.
The sound of the newly selected bass program can
now be played in pattern mode.
ZOOM RT-223
Example for BASS KEY setting of "E"
Entering Patterns in Real Time
4.
Press the [FUNCTION] key and then
pad 0 (BASS KEY).
BASSKE
When the bass track is selected, the pads play a
series of pitches that are a semitone apart, such as
C, C#, D, D#, ...B, C. You can change the bass
key that is assigned to the lowest pad (pad 0), as
shown in the illustration below.
HINT
The last selected key will be saved as the
root for that pattern. By specifying root
information in song mode, the bass track
can be shifted up or down, using this key
as reference.
5.
Use the VALUE [+]/[-] keys to select
the key to be assigned to pad 0.
HINT
T h e B A S S K E Y s e t t i n g i s s t o r e d
individually for each pattern.
6.
When the setting is complete, press
the [FUNCTION] key once more.
The [FUNCTION] key goes out and the unit
returns to the pattern mode.
E
25