Table of Contents
Advertisement
Hopper Installation
1. The Hose Plug must be
securely fastened to bot-
tom of gun when using the
Hopper. Gun Plug must be
removed from top of gun.
.
It is easier to remove plug if you first trigger gun.
2. Align notched
opening in base
of hopper to
raised notch on
hopper port of
gun body.
For overhead applications and high walls, position
the hopper on the gun with the material fill open-
ing facing toward the nozzle (front) of the gun. For
all other applications, material fill opening should
face the air valve (back) of the gun.
3. Push hopper down, over hopper port as far as it will
go.
309584H
Basic Operation
4. Fasten clamp.
5. Connect air hose to gun.
6. Install spray nozzle, page
ti2699b
7. Fill hopper with texture
ti2644a
8. Open air valve.
9. Turn compressor ON.
7.
mix.
Close air valve. Adjust air pressure starting at 30-40
psi.
Basic Operation
ti2449
ti2621a
ti2476
ti2448a
5
Advertisement
Table of Contents
