Sony ZV-1 Help Manual page 510

Help Guide
Digital Camera
ZV-1
HDMI Settings: TC Output (movie)
Sets whether or not to layer the TC (time code) information on the output signal via the HDMI terminal when outputting
the signal to other professional-use devices.
This function layers the time code information on the HDMI output signal. The product sends the time code information
as digital data, not as an image displayed on the screen. The connected device can then refer to the digital data to
recognize the time data.
MENU → (Setup) → [HDMI Settings] → [ TC Output] → desired setting.
1
Menu item details
On:
Time code is output to other devices.
Off:
Time code is not output to other devices.
Note
When [
TC Output] is set to [On], the image may not be output properly to the TV or recording device. In such cases, set [
TC Output] to [Off].
5-016-934-11(1) Copyright 2020 Sony Corporation
510