Manual Exposure - Sony ZV-1 Help Manual

Help Guide
Digital Camera
ZV-1

Manual Exposure

You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture.
MODE (Mode) button → [Manual Exposure] → press the center of the control wheel.
1
You can also set the shooting mode by selecting MENU →
Press the down side of the control wheel to select the shutter speed or aperture value, then turn the control
2
wheel to select a value.
You can also set [ISO] to [ISO AUTO] in manual exposure mode. The ISO value automatically changes to
achieve the appropriate exposure using the aperture value and shutter speed you have set.
When [ISO] is set to [ISO AUTO], the ISO value indicator will blink if the value you have set is not suitable for
appropriate exposure. If this happens, change the shutter speed or aperture value.
When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual)* to check the exposure value.
Toward +: Images become brighter.
Toward -: Images become darker.
0: Appropriate exposure analyzed by the product.
* Indicates under/over for appropriate exposure.
Adjust the focus and shoot the subject.
3
Hint
By assigning [AEL hold] or [AEL toggle] to a desired key using [
wheel while pressing that key, you can change the shutter speed and aperture (F-value) combination without changing the set
exposure value. (Manual shift)
Note
The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO].
When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes.
The SteadyShot warning indicator does not appear in manual exposure mode.
The brightness of the image on the screen may differ from the actual image being shot.
You cannot set [ND Filter] to [Auto].
Custom Key] or [
5-016-934-11(1) Copyright 2020 Sony Corporation
119
(Camera Settings1) → [Shoot Mode].
Custom Key] and turning the control