Bulb Shooting - Sony ZV-1 Help Manual

Help Guide
Digital Camera
ZV-1

Bulb shooting

You can shoot a trailing image of the movement of a subject with long exposure.
Bulb shooting is suitable for shooting trails from stars or fireworks, etc.
MODE (Mode) button → [Manual Exposure] → press the center of the control wheel.
1
You can also set the shooting mode by selecting MENU →
Press the down side of the control wheel to select the shutter speed, and turn the control wheel
2
counterclockwise until [BULB] is indicated.
Press the down side of the control wheel to select the aperture value (F-value), and turn the control wheel
3
to set the value.
Press the shutter button halfway down to focus.
4
Press and hold the shutter button for the duration of the shooting.
5
As long as the shutter button is pressed, the shutter remains open.
Hint
When shooting fireworks, etc., focus at infinity in manual focus mode.
In order to perform bulb shooting without causing the image quality to deteriorate, we recommend that you start shooting while
the camera is cool.
During bulb shooting, images tend to blur. It is recommended that you use a tripod, a RMT-P1BT Bluetooth remote commander
(sold separately) or a remote commander equipped with a lock function (sold separately). When using the RMT-P1BT Bluetooth
remote commander, you can start bulb shooting by pressing the shutter button on the remote commander. To stop bulb shooting,
press the shutter button on the remote commander again. To use the other remote commander, use the model which can be
connected via the Multi/Micro USB terminal.
Note
The longer the exposure time, the more noise will be visible on the image.
When [ Long Exposure NR] is set to [On], noise reduction is performed after shooting for the same duration that the shutter
was open. You cannot shoot while noise reduction is in progress.
You cannot set the shutter speed to [BULB] in the following situations:
[Smile Shutter]
[Auto HDR]
[Picture Effect] is set to [HDR Painting] or [Rich-tone Mono.].
[Multi Frame NR]
When [Drive Mode] is set to the following:
[Cont. Shooting]
[Self-timer(Cont)]
[Cont. Bracket]
[ Shutter Type] is set to [Electronic Shutter].
If you use the above functions when the shutter speed is set to [BULB], the shutter speed is temporarily set to 30 seconds.
(Camera Settings1) → [Shoot Mode].
120