Shutter Priority - Sony ZV-1 Help Manual

Hide thumbs Also See for ZV-1:
Table of Contents

Advertisement

Help Guide
Digital Camera
ZV-1

Shutter Priority

You can express the movement of a moving subject in various ways by adjusting the shutter speed, for example, at the
instant of the movement with high speed shutter, or as a trailing image with low speed shutter.
MODE (Mode) button → [Shutter Priority] → press the center of the control wheel.
1
You can also set the shooting mode by selecting MENU →
Select the desired value by turning the control wheel.
2
If proper exposure cannot be obtained after setup, the aperture value on the shooting screen blinks. If this
happens, change the shutter speed.
Adjust the focus and shoot the subject.
3
The aperture is automatically adjusted to obtain proper exposure.
Hint
Use a tripod to prevent camera-shake when you have selected a slow shutter speed.
When you shoot indoor sports scenes, set the ISO sensitivity to a higher value.
Note
The SteadyShot warning indicator does not appear in shutter speed priority mode.
When [
Long Exposure NR] is set to [On] and the shutter speed is 1/3 second(s) or longer with a [
than [Electronic Shutter] is set, noise reduction after shooting is performed for the same amount of time that the shutter was
open. However, you cannot shoot any more while noise reduction is in progress.
The brightness of the image on the screen may differ from the actual image being shot.
Related Topic
Long Exposure NR (still image)
5-016-934-11(1) Copyright 2020 Sony Corporation
118
(Camera Settings1) → [Shoot Mode].
Shutter Type] other

Advertisement

Table of Contents
loading

Table of Contents