16 ELECTRICAL SYSTEM
176
Main work
–
Connect the battery charger to the 12-V battery. Switch on the
battery charger.
Battery charger (58429074000)
In addition, this battery charger can be used to test the open-
circuit voltage, the starting ability of the 12-V battery, and
the alternator. It is impossible to overcharge the 12-V battery
using this device.
Info
Never remove cover
–
Switch off the battery charger after charging and disconnect it
from the 12-V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
M00729-11
cle is not being used
–
Position the negative cable and mount and tighten the screw.
Finishing work
–
Mount the battery cover. (
–
Mount the front rider's seat. (
1
.
3 months
p. 130)
p. 117)