Specification; Environnemental Protection Notes - GRAUPNER ULTRA DUO PLUS 50 Operating Manual

15. SPECIFICATION

Battery:
Charge currents / power
Discharge currents / power 100 mA to 10 A / max. 80 W
Ni-Cd & Ni-MH batteries:
Cell count
Capacity
Lithium batteries:
Cell count
Cell voltage
Capacity
Lead-acid / lead-gel batteries:
Cell count
Battery voltage
Capacity
General:
Operating voltage range DC input
Operating voltage range AC input
Car battery required
Mains PSU required
No-load current drain approx
balancer connector:
balancing current:
Low-voltage cut-off approx
Weight approx.
Dimensions approx. (W x D x H)
All data assumes a car battery voltage of 12.7 V.
The stated values are guidelines, and may vary according to battery state, temperature etc.
1) When powered by a main PSU, the charger will only operate correctly if the PSU is suitable in terms
of voltage, stability, maximum load capacity etc. You can avoid problems by using only the PSUs
which we specifically recommend.
100 mA to 10.0 A / max. 120W overall with internal power supply
100 mA to 10.0 A / max. 2x 180 W for using both outputs or 1x 250W for
using just one output with external 11...15V DC power supply
1 - 18 cells
min. 0.1 Ah to 9.9 Ah
1-7 cells
3,3 V (LiFe), 3,6 V (LiIo) / 3,7 V (LiPo/LiMn)
min. 0.1 Ah to 20.0 Ah
1, 2, 3, 4, 5, 6, 12 cells
2, 4, 6, 8, 10, 12, 24 V
0.1-45 Ah
11,0 to 15 V
100 ~ 240V
12 V, min. 50 Ah
11-15V, min. 5-40A stabilized 1)
0.3...0.6 A
1...7 NiMH/NiCd/LiPo/LiIo/LiFe cells
NiMH/NiCd: 0.1A, LiPo/LiIo/LiFe: 0.3A
11,0 V
2.2kg
230 x 225 x 83 mm

Environnemental Protection Notes

Page 52/53