Panasonic Lumix S1H Handbook page 41

TC IN 2 / 3
/ OUT
The initial time code value can be synchronized.
TC IN/OUT Socket
Set the [ System Frequency ] and [ Rec Quality ] to match the external device.
1
[ ] > [
2
> [ Count Up ] > [ FREE RUN ]
Select [ Time Code Mode ]
3
to match the external device.
[ External TC Setting ] >
4
[ TC Synchronization ] > [ TC IN ]
Set the time code count method of the external device to Free Run, and output signal.
5
The LUMIX S1H is in a slave state, and the [ TC ] of the time code shown on the screen switches to [
Synchronizing
BNC Conversion Cable
Do not use any other cables
except the bundled one.
* We recommend using a 5C-FB equivalent double-shielded BNC cables.
] > [ Time Code ] >
3. HDMI Output and TC IN/OUT
BNC Conversion Cable*
with the length of 2.8m or more
Commercially available
41
].