Time Code - Panasonic Lumix S1H Handbook

Time Code

Record and input the time codes.
[ ] > [
MOV or AVCHD only. MP4 is not compatible with time codes.
Time Code Display
Count Up
Time Code Value
Time Code Mode
HDMI Time Code Output
External TC Setting
* When setting the [Variable Frame Rate], it will be set to [ Rec Run ].
** It will be set to [ NDF ] with the following settings.
When setting [ 50.00Hz (PAL) ] or [ 24.00Hz (CINEMA) ]. When setting 47.95 or 23.98p.
] > [ Time Code ]
The time code is displayed on the screen.
Rec Run* / Free Run
Reset / Manual Input / Current Time
DF (Drop Frame) / NDF (Non-Drop Frame)**
The time code information and images are output together.
The initial values of the time codes of the LUMIX S1H and
external device are synchronized.
3. HDMI Output and TC IN/OUT
39