Raw Data Output - Panasonic Lumix S1H Handbook

RAW Data Output

Ver. 2.1
With firmware version
data with a maximum resolution of 5.9K can
be output via HDMI to an external recorder.
Compatible External Recorder (As of July 2020)
ATOMOS Ninja V
4K HDR Monitor-Recorder
AtomosOS 10.52 or higher
• Please contact ATOMOS for more information.
Connect the camera and the external recorder with an HDMI cable, and turn them on.
1
• Use a "High Speed HDMI cable" that has the HDMI logo on it, and that is described as "4K compatible".
[ ] > [
2
[ HDMI RAW Data Output ] > [ ON ]
[ ] > [
3
► PAGE 101 : Rec Qualities
Note
• [ Info Display ] is not available. You can not output the camera information display to an external recorder.
• [ Down Convert ] is not available.
• Images equivalent to V-Log recording are displayed on the camera display.
• Only the [ LUT View Assist (Monitor) ] that applies the preset "Vlog_709" can be used.
• When using the [ LUT View Assist (Monitor) ], "709" will be displayed on the screen.
2.1, 12-bit RAW video
] >
] > [ Rec Quality ]
3. HDMI Output and TC IN/OUT
33