Zanussi ZWF 1022 User Manual page 7

• Remove the power supply cable and the draining and
inlet hose from the hose holders ( C ) on the rear of
the appliance.
• Unscrew the three bolts ( A ) and remove the hose
holders ( C ).
• Slide out the relevant plastic spacers ( B ).
• Plug the smaller upper hole and the two large ones
with the corresponding plastic plug caps.
Positioning and levelling
Level the appliance by raising or lowering the feet.
The appliance MUST be level and stable on a flat hard
floor. If necessary, check the setting with a spirit level.
Any necessary adjustment can be made with a spanner.
x 4
7