Table of Contents
Advertisement
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered
and manufactured with the highest priority on safety. However, improper use can result
in electric shock and / or fire. In order to prevent potential danger, please observe the
following instructions when installing, operating and cleaning the product. To ensure
your safety and prolong the service life of your Liquid Crystal Display, please read the
following precautions carefully before using the product.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade and
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
SCEPTRE C27 FHD Display User Manual
- 1 -
www.SCEPTRE.com
Advertisement
Table of Contents
Related Manuals for Sceptre C27
Summary of Contents for Sceptre C27
-
Page 1: Safety Instructions
- 1 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... - Page 2 Install in structions. No naked flame sources, such as lighted candles, should be placed on the apparatus. 10. Operating environment: temperature: 5°C~35°C, Humidity: 10% to 90% non- condensing, altitude: 0~2,000 m. - 2 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual...
-
Page 3: Important Information
IMPORTANT INFORMATION - 3 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... - Page 4 The house icon identifies that this product is for indoor use. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. - 4 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual...
- Page 5 If you are not Do not place the display on cloth or sure of the type of power supplied to other materials that may be located - 5 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual...
- Page 6 5°C ~ 35°C, Humidity: 10% to 90% power cord and contact your dealer non-condensing, Altitude: 0~2,000 m. immediately. Do not try to repair the product yourself. - 6 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual...
- Page 7 Dear Sceptre Customer, Congratulations on your new SCEPTRE C27 LED monitor purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference.
-
Page 8: Opening The Package
Opening the Package The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening; it is recommended that the display package must be handled by a minimum of 2 or more persons. -
Page 9: Assembling The Stand
With the monitor still lying in the package foam, lay it down on a table with the display facing downwards. Open up the top foam exposing the back. Take out the plastic covers shown in the picture below. - 9 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... - Page 10 Insert the assembled neck+base (stand) into the opening. Secure the installation by screwing in 2 neck screws and putting the 2 plastic covers back. - 10 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual...
-
Page 11: Disassembling The Stand
The neck can now be removed. Please Note: The buckle at the bottom of the base is made of plastic. Users are cautioned not to apply too much force. - 11 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 12: Table Of Contents
How do I clean the LED Monitor? ..............28 Specification ....................29 LIMITED PRODUCT WARRANTY ..............30 Disclaimer, Trademarks, Icons & Copyright Information ....... 32 FCC Compliance Statement ................33 - 12 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 13: Identifying Front And Rear Panel
8mm. Please Note: The 8mm length of screw refers to how deep the screw can go inside the mounting holes 8mm to the thickness of your mounting plate in order to get the total screw length. - 13 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 14: Rear Control Buttons
This button moves the selection down while the OSD is active. This button will also decrease the value of an adjustment while an option is open. - 14 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 15: Rear View Connections
This connection is for audio out from the monitor to multimedia speakers or headphones. POWER This plug is responsible for providing power to the monitor. Use it with the included AC adapter. - 15 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 16: Connections
2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the computer. 3. Turn on the power of both the C27 LED MONITOR and the computer. Please Note: Make sure to set audio output from your computer to PCM output. -
Page 17: If You Have Vga
If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 75 Hz frequency before using the C27 LED MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. -
Page 18: On Screen Display (Osd) Menu
Use the MENU button again to enter the function already, use the MENU button to select the option you want to adjust. Use the values. When you want to exit press the EXIT button. - 18 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 19: Quick Start
This option lets the user manually switch an input or auto where the monitor detects a signal and changes the source automatically. BLUE LIGHT SHIFT This display mode filters out blue light for users who want blue light protection. - 19 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 20: Picture
This option adjusts the sharpness of graphics and text for this monitor. VGA Settings This setting allows users to adjust the image quality of the monitor. AUTO ADJUST This option auto adjusts the picture for optimal - 20 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... - Page 21 V. POSITION This option adjusts the vertical position of the image. CLOCK This option adjusts the picture clarity by large increments. PHASE This option adjusts the picture clarity by small increments. - 21 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual...
-
Page 22: Color
This option adjusts the tint of the entire monitor. SATURATION This option adjusts the color saturation of the entire monitor. BLUE LIGHT SHIFT This display mode filters out blue light for users who want blue light protection. - 22 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 23: System
This option allows users to change the output level of the audio out port. MUTE PRODUCT INFORMATION This option displays more information about the product display and its specifications. RESET This option resets all values of the menu back to factory default. - 23 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 24: Supported Pc (Vga) Resolution
1080p *Once a mode is optimized, there is no need to make any further adjustment as long as the VGA card remains unchanged. **Specifications are subject to change without notice. - 24 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 25: Troubleshooting
Click on the MONITOR tab and change the refresh rate to 60 Hz. Click on OK 2-3 times to finalize your change. make sure both the C27 LED monitor and your computer is turned off. Turn on the LED monitor and the computer. - Page 26 HOW DO I RESET Make sure there is a valid video signal to the monitor and THE MONITOR press menu to open the OSD. Look for ALL RESET under the OTHERS options. - 26 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual...
- Page 27 I DO NOT HEAR ANY The monitor only decodes PCM sound signals. Make sure SOUND FROM THE and is SPEAKERS WHEN outputting PCM sound format. USING THE (OPTIONAL) HDMI PORT - 27 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual...
-
Page 28: How Do I Clean The Led Monitor
Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards. - 28 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual... -
Page 29: Specification
Built-in Speakers 2 × Display Tilt Angle 5°-15° Features VGA, HDMI (HDCP supported), AUDIO OUT FCC, CTUV, ISTA 6A, MS WHQL Compliance *Specifications are subject to change without notice. - 29 - www.SCEPTRE.com SCEPTRE C27 FHD Display User Manual...